Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Iveco/motowektor › Other models › 35S18

Iveco/motowektor 35S18

Built: 2024 · Series: Other models

More machines from model year 2024

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Iveco/motowektor 35S18 is a vehicle built by Iveco/motowektor. Production: 2024. The engine has 4 cylinders, with a displacement of 2,998 cm³. The vehicle is 2,240 mm wide. The unladen weight is 2,545 kg. The wheelbase measures 3,750 mm. Top speed is 160 km/h. The gross vehicle weight is 3,500 kg. The vehicle runs on 4 wheels. Unladen weight within this group ranges from 74.2 to 23,550 kg; the 35S18 sits at the bottom of that range with 2,545 kg. Its immediate neighbours are the RAM RAM 1500 REBEL below it with 2,544 kg and the Blackwood above it with 2,546 kg. Gross vehicle weight within this group ranges from 540 to 48,000 kg; here the 35S18 sits at the bottom of that range with 3,500 kg.

Iveco 35S18 (Motowektor) – conversion on an Iveco chassis with single rear wheels, 3,500 kg gross weight and 3.75 m wheelbase

The 35S18 type designation in the Iveco Daily range follows a fixed pattern: the 35 marks the weight class around 3.5 tonnes, the letter S denotes the version with single wheels on the rear axle. The operator Motowektor fitted its own body onto this chassis, as is common for chassis in this class: cab from the vehicle manufacturer, body built to the purpose required.

Read on 3 more paragraphs

The four-cylinder diesel engine has a displacement of 2,998 cm³. At a gross vehicle weight of 3,500 kg against an unladen weight of 2,545 kg, 955 kg remain for body and load. The 3.75 m wheelbase is shorter than most other examples of this chassis, the width is 2.24 m, and the permitted top speed is given as 160 km/h; no figure for overall length is on record for this vehicle.

At 3,500 kg gross weight the vehicle falls into EU class N1 and can be driven on a category B licence provided body weight and load together do not exceed the remaining 955 kg. The short 3.75 m wheelbase favours manoeuvrability compared with the 4.10 m versions, at the cost of the possible body length. At this combination of short wheelbase and moderate payload, the single rear wheels rely on careful load distribution.

When buying a used vehicle of this kind, it is worth checking the bolted connection between frame and body for play and the mounting spacers for corrosion. Because of the shorter wheelbase, the steering geometry should also be checked for uneven front tyre wear, which occurs more often on short chassis. Tightness and hinges on the body doors belong in the basic inspection, as does the rear brake system.

Sources: SpecCodex-Register: Kennwerte des Modells 35S18

Technical data

Engine

Cylinders4correct
Displacement2,998 cm³correct

Dimensions and weights

Width2,240 mmcorrect
Wheelbase3,750 mmcorrect
Unladen weight2,545 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Wheels4correct
Top speed160 km/hcorrect

Frequently asked questions

How much does the Iveco/motowektor 35S18 weigh?

The unladen weight is 2,545 kg.

What is the gross vehicle weight of the Iveco/motowektor 35S18?

3,500 kg.

What engine does the Iveco/motowektor 35S18 have?

4 cylinders, 2,998 cm³ displacement.

When was the Iveco/motowektor 35S18 built?

Production years: 2024.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare