Iveco/agb Project 35S18
Built: 2022-2024 · Series: Other models
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco/AGB Project – other models: a registry entry of light Iveco chassis in the 3.5-tonne class with a 3.0-litre four-cylinder engine, 2,360 to 2,930 kg kerb weight, 7,600 mm length
This page gathers the Iveco vehicles listed under the AGB Project designation that the register could not assign to a named range. The type names 35S18, 35S21 and 50C/35 follow Iveco's light-commercial logic, where the leading figure denotes the weight class; the gross weight of 3,500 kg recorded throughout confirms the 35 class even for the type designated 50C/35.
Read on 3 more paragraphs
The register lists 3 versions here with kerb weights from 2,360 to 2,930 kg at a gross weight of 3,500 kg, four-cylinder engines of 2,998 cm³, a length of 7,600 mm and widths from 2,110 to 2,280 mm.
The uniform roughly three-litre engine alongside varying kerb weights points to different bodies on the same chassis, common in the conversion trade for box vans, flatbeds and special bodies; the 3.5-tonne class remains the most widely used step in European distribution traffic, which explains why several independently named converters register their own series on the same underlying chassis.
On used vehicles of this class, check rust on the frame and sills, the condition of the clutch, turbocharger and particulate filter, and how any body connects to the chassis; drivetrain parts come through the independent parts network for Iveco commercial vehicles.
Sources: SpecCodex register, model data: Iveco/AGB Project (weitere Modelle)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,998 cm³correct |
Dimensions and weights
| Length | 7,600 mmcorrect |
|---|---|
| Width | 2,280 mmcorrect |
| Wheelbase | 4,100 mmcorrect |
| Unladen weight | 2,725 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 160 km/hcorrect |
Frequently asked questions
How much does the Iveco/agb Project 35S18 weigh?
The unladen weight is 2,725 kg.
What is the gross vehicle weight of the Iveco/agb Project 35S18?
3,500 kg.
What engine does the Iveco/agb Project 35S18 have?
4 cylinders, 2,998 cm³ displacement.
What are the dimensions of the Iveco/agb Project 35S18?
7,600 mm × 2,280 mm.
When was the Iveco/agb Project 35S18 built?
Production years: 2022-2024.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.