Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Ursus › Other models › C-451

Ursus C-451 – specifications

Built: 1954–1959 · Series: Other models

Data for the version built 1954–1959 · Data origin: Reference work (Wikipedia/Wikibooks) · sources

← Predecessor: C-45 · Successor: C-330 →

More machines from model year 1954

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The C-451 comes from Ursus. Production: 1954–1959. The engine delivers 45 hp (33.1 kW), has 1 cylinder. The engine comes from Ursus. Rated speed is 630 rpm. The machine is 3,430 mm long, 1,835 mm wide and 2,520 mm high. The wheelbase measures 2,036 mm. Ground clearance is 220 mm. Top speed is 16.7 km/h. The tank holds 95 litres. Transmission: 6 V/2 R. The engine is water-cooled. Tyres: front 6.50-20, rear 12.75-28. The model was built in Poland. The fuel is Vielstoff. The bore measures 225 mm. The stroke is 260 mm. The compression ratio is 4.7:1. The gearbox offers 6 forward gears. There are also 2 reverse gears. Injection pressure is 80 bar. The linkage is category drawbar. Its predecessor was the Ursus C-45. It was succeeded by the Ursus C-330. Around ca. 50.000 units were built. Rated output across the Ursus range ranges from 8 to 192.6 hp; the C-451 sits in the lower part of that range with 45 hp. Its immediate neighbours are the 4011 below it with 42 hp and the 3512 above it with 47 hp. Rated output across the Ursus range ranges from 8 to 190 hp; here the C-451 sits in the lower part of that range with 45 hp. 221 Ursus models across 12 series are on record.

Ursus — one brand, two licences, many relatives

Anyone looking at an Ursus rarely sees a purely in-house design. The brand's history is a history of licences — and that is precisely why parts are often easier to find than the production figures would suggest.

Read on 4 more paragraphs

In 1965 the Warsaw plant began building the C-4011 under a licence agreement with Zetor in Brno. At its heart sat the S-4001 engine, the Polish version of Zetor's Z-4001. That kinship runs through the ranges: the later C-360, built from 1976 and in the programme until the end of 1994, used the S-4003, the strongest engine of that family.

In 1974 a second licence followed — the British one from Massey Ferguson, together with the associated production plant. Models such as the MF 235, MF 255 and MF 265 were then built in Poland with Perkins engines and became a fixture on many farms. The higher Ursus ranges with four-digit numbers descend from this line.

One remarkable long-runner stands out: the C-325 and its revised versions C-328 and C-330 — popularly the "thirties" — plus the C-335 export version, ran without interruption for 34 years until 1993.

When buying used it is therefore worth establishing the range's ancestry first. An Ursus from the Zetor line shares engine parts with Czech machines, one from the Massey Ferguson line with British ones. That decides where to look for components.

Sources: warzywa.pl, Wiadomości Rolnicze Polska, ursus.info.pl

Technical data

Engine

Engine makeUrsuscorrect
FuelVielstoffcorrect
Power45 hp (33.1 kW)correct
Rated speed630 rpmcorrect
Cylinders1correct
Displacement10,300correct
Bore225 mmcorrect
Bore225 mmcorrect
Stroke260 mmcorrect
Stroke260 mmcorrect
Compression ratio4.7correct
Injection pressure80 barcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,430 mmcorrect
Length3,430correct
Width1,835 mmcorrect
Width1,800correct
Height2,520 mmcorrect
Height2,520correct
Wheelbase2,036 mm (2,035 in)correct
Ground clearance220 mmcorrect
Unladen weight3,380correct

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox6 V/2 Rcorrect
Gearbox makeUrsuscorrect
Forward gears6correct
Reverse gears2correct
Front tyres6.50-20correct
Rear tyres12.75-28correct
Top speed16.7 km/hcorrect

Working data

Fuel tank capacity95 lcorrect

Origin and approval

PlantPolandcorrect
Units builtca. 50.000correct

Other data

Linkage categorydrawbarcorrect
PredecessorUrsus C-45correct
SuccessorUrsus C-330correct

Frequently asked questions

How much power does the Ursus C-451 have?

The Ursus C-451 delivers 45 hp.

What engine does the Ursus C-451 have?

1 cylinders, Vielstoff.

How fast does the Ursus C-451 go?

Top speed is 16.7 km/h.

What are the dimensions of the Ursus C-451?

3,430 mm × 1,835 mm × 2,520 mm.

When was the Ursus C-451 built?

Production years: 1954–1959.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 42 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​​​‌‌‍​‌‍⁠​​​⁠⁠‌‌‍⁠⁠

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare