Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Ursus › C-45

Ursus C-45

Built: 1947–1959 · Series: C

Successor: C-451 →

More machines from model year 1947

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The C-45 from Ursus is part of the C series. Production: 1947–1959. The engine delivers 45 hp (33.1 kW), has 1 cylinder. The engine comes from Ursus. Rated speed is 630 rpm. The machine is 3,522 mm long, 1,835 mm wide and 2,190 mm high. The unladen weight is 3,750 kg. The wheelbase measures 2,036 mm. Ground clearance is 220 mm. Top speed is 6.2 km/h. The tank holds 95 litres. Transmission: 3 V/1 R or 6 V/2 R. The engine is water-cooled. Tyres: front 6.50-20, rear 12.75-28. The model was built in Poland. The fuel is Vielstoff. The linkage is category drawbar. Its predecessor was the Ursus LB-45. It was succeeded by the Ursus C-451. Around ca. 60.000 units were built. Rated output across the Ursus range ranges from 8 to 192.6 hp; the C-45 sits in the lower part of that range with 45 hp. Its immediate neighbours are the 4011 below it with 42 hp and the 3512 above it with 47 hp. Rated output across the Ursus range ranges from 8 to 190 hp; here the C-45 sits in the lower part of that range with 45 hp. 221 Ursus models across 12 series are on record.

Ursus C – early post-war tractors from the Polish maker Ursus: the small C-308 and the single-cylinder C-45, 5.9 to 33.1 kW (8 to 45 hp)

The C range brings together two very different early models from the Polish Ursus tractor works near Warsaw: the small C-308 and the heavy single-cylinder C-45. Both carry the factory's terse C type logic, yet differ fundamentally in size, weight and engine design – the C-308 ran on two-stroke petrol-oil mix, the C-45 as a multi-fuel engine able to take several kinds of fuel. Ursus was the central Polish tractor works of the post-war era, and it built its first independent designs in exactly this phase.

Read on 3 more paragraphs

The register lists 2 versions with 5.9 to 33.1 kW (8 to 45 hp) from single-cylinder engines, unladen weights of 270 to 3,750 kg, lengths of 2,700 to 3,522 mm, widths of 695 to 1,835 mm, heights of 970 to 2,190 mm and rated speeds of 630 to 2,400 rpm.

Ursus was the central tractor brand of socialist Poland, supplying farms across the country and export markets in the Eastern Bloc for decades; the early C models mark the build-up of an independent Polish tractor production in the first post-war years, long before the brand gained international standing with larger, licence-built ranges.

On used examples, the condition of cylinder and piston, the tightness of the fuel system, the state of clutch, gearbox and brakes, and rust on sheet-metal parts and the frame all count; spare parts for these early types are scarce and run almost entirely through collectors and specialist restorers.

Sources: SpecCodex register, model data: Ursus C, Ursus (manufacturer)

Technical data

Engine

Engine makeUrsuscorrect
FuelVielstoffcorrect
Power45 hp (33.1 kW)correct
Rated speed630 rpmcorrect
Cylinders1correct
Displacement10,300 cccorrect
Bore225 mmcorrect
Stroke260 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,522 mmcorrect
Length3,430 mmcorrect
Width1,835 mmcorrect
Width1,800 mmcorrect
Height2,190 mmcorrect
Height2,260 mmcorrect
Wheelbase2,036 mm (2,035 in)correct
Ground clearance220 mmcorrect
Unladen weight3,750 kg (3,380 lbs)correct

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox3 V/1 R or 6 V/2 Rcorrect
Gearbox makeUrsuscorrect
Forward gears3 or 6correct
Reverse gears1 or 2correct
Front tyres6.50-20correct
Rear tyres12.75-28correct
Top speed6.2 km/hcorrect

Working data

Fuel tank capacity95 lcorrect

Origin and approval

PlantPolandcorrect
Units builtca. 60.000correct

Other data

Linkage categorydrawbarcorrect
PredecessorUrsus LB-45correct
SuccessorUrsus C-451correct

Where this model stands

Power-to-weight ratio: 8.8 kW/t (33 kW / 3.8 t)

Power class: Universal (40–100 hp)

Stronger than 29% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ursus C-45 have?

The Ursus C-45 delivers 45 hp.

How much does the Ursus C-45 weigh?

The unladen weight is 3,750 kg.

What engine does the Ursus C-45 have?

1 cylinders, Vielstoff.

How fast does the Ursus C-45 go?

Top speed is 6.2 km/h.

What are the dimensions of the Ursus C-45?

3,522 mm × 1,835 mm × 2,190 mm.

When was the Ursus C-45 built?

Production years: 1947–1959.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 39 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare