Manitou MI 70 D ST5
Series: MI
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Manitou MI 70 D ST5 is among the largest forklifts of the MI industrial series. D stands for diesel, ST5 for emission stage V, and the figure 70 marks the highest load-capacity class in the series. Unlike the models with the addition US this is the version for the European market.
Such heavy-duty trucks are meant for firms that move large individual weights: steelworks, precast concrete makers, natural-stone works and container handling. The diesel engine provides the power that the mast at high load and the heavy running gear need; a torque-converter transmission ensures smooth starting. The wide tires spread the weight and allow travel on paved outdoor areas.
On a used purchase operating hours and service records are central, since heavy-duty trucks are strongly stressed in service. Particular attention goes to lift cylinders, mast guides, fork carriage, brake system and steering axle. The stability limits of the truck should also be documented, since with high loads a wrong load centre leads to tipping risk.
Manitou MI – industrial forklifts with diesel and gas power
The MI range is Manitou's line of industrial counterbalance forklifts. The maker from Ancenis, France is best known for rough-terrain forklifts and telehandlers; the MI series addresses the conventional forklift market. According to trade press, the range includes diesel and LPG models with capacities from 1,500 to 3,500 kg, with higher-capacity units reaching 6,000 and 7,000 kg. They use Powershuttle transmissions, hydrostatic steering and masts similar to those on Manitou's rough-terrain forklifts.
Read on 2 more paragraphs
Typical uses are warehouses, building-material yards and works yards.
Listed in the register: Manitou MI 25 D ST5 US, MI 35 G US, MI 50 G US and MI 70 D ST5.
Sources: Warehouse News, Manitou History
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Manufacturer documentation, manitou.com (retrieved August 2026) · manitou.com (retrieved October 2026) · How we check the data
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.
