Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Farmer 309 Compact

Fendt Farmer 309 Compact

Built: 1997–2003 · Series: Farmer 300

More machines from model year 1997

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Farmer 309 Compact from Fendt is part of the Farmer 300 series. Production: 1997–2003. The engine delivers 105 hp, has 4 cylinders, with a displacement of 3,192 cm³. Torque is 378 Nm. Rated speed is 2,400 rpm. The machine is 4,000 mm long, 2,140 mm wide and 2,680 mm high. The unladen weight is 4,110 kg. The wheelbase measures 2,280 mm. Ground clearance is 480 mm. Top speed is 44 km/h. Transmission: 21V/6R (auf Wunsch: 21/21). The engine is water-cooled. Tyres: front 440/65 R 24, rear 540/65 R 34. The fuel is diesel. The bore measures 94 mm. The stroke is 115 mm. The compression ratio is 17.5:1. Maximum torque is reached at 1,500 rpm. Construction: semi-frame construction. Injection pressure is 1200 bar. Around 6737 units were built. The Farmer 300 series covers 21 models. Rated output within it ranges from 62 to 125 hp; the Farmer 309 Compact sits in the upper part of that range with 105 hp. Its immediate neighbours are the Farmer 311 LSA below it with 100 hp and the Farmer 311 above it with 115 hp. Unladen weight within it ranges from 3,255 to 5,350 kg; here the Farmer 309 Compact sits in the middle of that range with 4,110 kg. 1545 Fendt models across 89 series are on record.

Fendt Farmer 300 – the Marktoberdorf mid-range 1980–1999: 305 to 312, LS and LSA, Turbomatik, 46 to 92 kW

For two decades the Farmer 300 was Fendt's mid-range and the tractor on which many family farms in southern Germany and Austria grew. The range appeared in 1980 as successor to the Farmer 200 and 100 types, gained the 305 to 312 models in a new cab in 1984, was revised in 1987 to the loader-friendly LSA generation and in 1993 to the Ci generation with a new bonnet and Turbomatik converter clutch, before the Farmer 400 Vario and later the 300 Vario followed in 1999. The engines – three-, four- and six-cylinder – were built by MWM, from the late 1980s at the Mannheim plant, which then belonged to Fendt's parent company Klöckner-Humboldt-Deutz.

Read on 3 more paragraphs

The type number gives the power step, the letters the equipment: LS stands for the powershift version with Turbomatik starting clutch, LSA for the same with four-wheel drive, C and CA for the simpler version without powershift, Compact for the lower overall height, Ci for the models from 1993. In the register the models run from 46 to 92 kW (62 to 125 hp) with 3,117 to 6,234 cm³ and three to six cylinders, 238 to 459 Nm of torque, unladen weights from 3,255 to 5,350 kg, lengths from 3,780 to 4,480 mm and heights from 2,597 to 2,820 mm.

The Turbomatik – a hydraulic converter clutch that takes up drive smoothly when starting and shifting – was Fendt's unique feature in this class and a reason for the Farmer 300's reputation as a clutch-sparing loader tractor.

Used Farmer 300s are sought-after tractors with stable prices. When buying, the condition of the MWM engine (cooling system, cylinder head on the six-cylinders), the Turbomatik and powershift transmission, the loader mounting and the front axle on four-wheel-drive models are what count.

Sources: SpecCodex register, model data: Fendt Farmer 300, Fendt (AGCO, Hersteller), Fendt Farmer (Wikipedia)

Technical data

Engine

Fueldieselcorrect
Power105 hpcorrect
Rated speed2,400 rpmcorrect
Torque378 Nmcorrect
Speed at max. torque1,500 rpmcorrect
Cylinders4correct
Displacement3,192 cm³correct
Bore94 mmcorrect
Stroke115 mmcorrect
Compression ratio17.5correct
Injection pressure1,200 barcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length4,000 mmcorrect
Width2,140 mmcorrect
Height2,680 mmcorrect
Wheelbase2,280 mmcorrect
Ground clearance480 mmcorrect
Unladen weight4,110 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox21V/6R (auf Wunsch: 21/21)correct
Front tyres440/65 R 24correct
Rear tyres540/65 R 34correct
Top speed44 km/hcorrect

Origin and approval

Constructionsemi-frame constructioncorrect
Units built6,737correct

Where this model stands

Power-to-weight ratio: 18.8 kW/t (77 kW / 4.1 t)

Power class: Large (100–180 hp)

Stronger than 69% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt Farmer 309 Compact have?

The Fendt Farmer 309 Compact delivers 105 hp.

How much does the Fendt Farmer 309 Compact weigh?

The unladen weight is 4,110 kg.

What engine does the Fendt Farmer 309 Compact have?

4 cylinders, 3,192 cm³ displacement, Diesel.

How fast does the Fendt Farmer 309 Compact go?

Top speed is 44 km/h.

What are the dimensions of the Fendt Farmer 309 Compact?

4,000 mm × 2,140 mm × 2,680 mm.

When was the Fendt Farmer 309 Compact built?

Production years: 1997–2003.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare