Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Farmer 307

Fendt Farmer 307

Built: 1993–1998 · Series: Farmer 300

More machines from model year 1993

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Farmer 307, Fendt offers a model from the Farmer 300 series. Production: 1993–1998. The engine delivers 75 hp (55 kW), has 3 cylinders, with a displacement of 3,117 cm³. Torque is 306 Nm. Rated speed is 2,200 rpm. The machine is 3,890 mm long, 2,110 mm wide and 2,670 mm high. The unladen weight is 3,850 kg. The wheelbase measures 2,152 mm. Ground clearance is 480 mm. Top speed is 40 km/h. The tank holds 80 litres. Transmission: 21/21. The engine is water-cooled. Tyres: front 380/70 R 24, rear 480/70 R 34. The fuel is diesel. The bore measures 105 mm. The stroke is 120 mm. Maximum torque is reached at 1,500 rpm. Construction: unit construction (no separate frame). The gearbox offers 21 forward gears. The linkage is category II. The PTO runs at 540/750/1000 rpm. Around 483 units were built. The Farmer 300 series covers 21 models. Rated output within it ranges from 62 to 125 hp; the Farmer 307 sits in the lower part of that range with 75 hp. Its immediate neighbours are the Farmer 307 LSA below it with 70 hp and the Farmer 308 LS above it with 78 hp. Unladen weight within it ranges from 3,255 to 5,350 kg; here the Farmer 307 sits in the lower part of that range with 3,850 kg. 1545 Fendt models across 89 series are on record.

Fendt Farmer 300 – the Marktoberdorf mid-range 1980–1999: 305 to 312, LS and LSA, Turbomatik, 46 to 92 kW

For two decades the Farmer 300 was Fendt's mid-range and the tractor on which many family farms in southern Germany and Austria grew. The range appeared in 1980 as successor to the Farmer 200 and 100 types, gained the 305 to 312 models in a new cab in 1984, was revised in 1987 to the loader-friendly LSA generation and in 1993 to the Ci generation with a new bonnet and Turbomatik converter clutch, before the Farmer 400 Vario and later the 300 Vario followed in 1999. The engines – three-, four- and six-cylinder – were built by MWM, from the late 1980s at the Mannheim plant, which then belonged to Fendt's parent company Klöckner-Humboldt-Deutz.

Read on 3 more paragraphs

The type number gives the power step, the letters the equipment: LS stands for the powershift version with Turbomatik starting clutch, LSA for the same with four-wheel drive, C and CA for the simpler version without powershift, Compact for the lower overall height, Ci for the models from 1993. In the register the models run from 46 to 92 kW (62 to 125 hp) with 3,117 to 6,234 cm³ and three to six cylinders, 238 to 459 Nm of torque, unladen weights from 3,255 to 5,350 kg, lengths from 3,780 to 4,480 mm and heights from 2,597 to 2,820 mm.

The Turbomatik – a hydraulic converter clutch that takes up drive smoothly when starting and shifting – was Fendt's unique feature in this class and a reason for the Farmer 300's reputation as a clutch-sparing loader tractor.

Used Farmer 300s are sought-after tractors with stable prices. When buying, the condition of the MWM engine (cooling system, cylinder head on the six-cylinders), the Turbomatik and powershift transmission, the loader mounting and the front axle on four-wheel-drive models are what count.

Sources: SpecCodex register, model data: Fendt Farmer 300, Fendt (AGCO, Hersteller), Fendt Farmer (Wikipedia)

Technical data

Engine

Fueldieselcorrect
Power75 hp (55 kW)correct
Rated speed2,200 rpmcorrect
Torque306 Nmcorrect
Speed at max. torque1,500 rpmcorrect
Cylinders3correct
Displacement3,117 cm³correct
Bore105 mmcorrect
Stroke120 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,890 mmcorrect
Width2,110 mmcorrect
Height2,670 mmcorrect
Wheelbase2,152 mmcorrect
Ground clearance480 mmcorrect
Unladen weight3,850 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox21/21correct
Forward gears21correct
Front tyres380/70 R 24correct
Rear tyres480/70 R 34correct
Top speed40 km/hcorrect

Working data

Fuel tank capacity80 lcorrect

Origin and approval

Constructionunit construction (no separate frame)correct
Units built483correct

Other data

Linkage categoryCat IIcorrect
PTO speed540/750/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 14.3 kW/t (55 kW / 3.9 t)

Power class: Universal (40–100 hp)

Stronger than 51% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt Farmer 307 have?

The Fendt Farmer 307 delivers 75 hp.

How much does the Fendt Farmer 307 weigh?

The unladen weight is 3,850 kg.

What engine does the Fendt Farmer 307 have?

3 cylinders, 3,117 cm³ displacement, Diesel.

How fast does the Fendt Farmer 307 go?

Top speed is 40 km/h.

What are the dimensions of the Fendt Farmer 307?

3,890 mm × 2,110 mm × 2,670 mm.

When was the Fendt Farmer 307 built?

Production years: 1993–1998.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 29 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare