Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Farmer 306 LS / LSA

Fendt Farmer 306 LS / LSA

Built: 1980–1990 · Series: Farmer 300

More machines from model year 1980

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Fendt Farmer 306 LS / LSA belongs to the Farmer 300 series. Production: 1980–1990. The engine delivers 70 hp (51.5 kW), has 4 cylinders, with a displacement of 4,154 cm³. Torque is 277 Nm. Rated speed is 2,200 rpm. The machine is 3,919 mm long, 1,975 mm wide and 2,597 mm high. The unladen weight is 3,460 kg. The wheelbase measures 2,388 mm. Ground clearance is 472 mm. Top speed is 30 km/h. Transmission: 15v/4r. The engine is water-cooled. Tyres: front 7.50-20 / 10-16 (LS), rear 16.9R34 / 16.9R30 (LS). The fuel is diesel. Maximum torque is reached at 1,396 rpm. Construction: unit construction (no separate frame). Around 4620 (LS) / 3850 (LSA) units were built. The Farmer 300 series covers 21 models. Rated output within it ranges from 62 to 125 hp; the Farmer 306 LS / LSA sits at the bottom of that range with 70 hp. Its immediate neighbours are the 305 LS below it with 62 hp and the Farmer 307 above it with 75 hp. Unladen weight within it ranges from 3,255 to 5,350 kg; here the Farmer 306 LS / LSA sits at the bottom of that range with 3,460 kg. 1545 Fendt models across 89 series are on record.

Fendt Farmer 300 – the Marktoberdorf mid-range 1980–1999: 305 to 312, LS and LSA, Turbomatik, 46 to 92 kW

For two decades the Farmer 300 was Fendt's mid-range and the tractor on which many family farms in southern Germany and Austria grew. The range appeared in 1980 as successor to the Farmer 200 and 100 types, gained the 305 to 312 models in a new cab in 1984, was revised in 1987 to the loader-friendly LSA generation and in 1993 to the Ci generation with a new bonnet and Turbomatik converter clutch, before the Farmer 400 Vario and later the 300 Vario followed in 1999. The engines – three-, four- and six-cylinder – were built by MWM, from the late 1980s at the Mannheim plant, which then belonged to Fendt's parent company Klöckner-Humboldt-Deutz.

Read on 3 more paragraphs

The type number gives the power step, the letters the equipment: LS stands for the powershift version with Turbomatik starting clutch, LSA for the same with four-wheel drive, C and CA for the simpler version without powershift, Compact for the lower overall height, Ci for the models from 1993. In the register the models run from 46 to 92 kW (62 to 125 hp) with 3,117 to 6,234 cm³ and three to six cylinders, 238 to 459 Nm of torque, unladen weights from 3,255 to 5,350 kg, lengths from 3,780 to 4,480 mm and heights from 2,597 to 2,820 mm.

The Turbomatik – a hydraulic converter clutch that takes up drive smoothly when starting and shifting – was Fendt's unique feature in this class and a reason for the Farmer 300's reputation as a clutch-sparing loader tractor.

Used Farmer 300s are sought-after tractors with stable prices. When buying, the condition of the MWM engine (cooling system, cylinder head on the six-cylinders), the Turbomatik and powershift transmission, the loader mounting and the front axle on four-wheel-drive models are what count.

Sources: SpecCodex register, model data: Fendt Farmer 300, Fendt (AGCO, Hersteller), Fendt Farmer (Wikipedia)

Technical data

Engine

Fueldieselcorrect
Power70 hp (51.5 kW)correct
Rated speed2,200 rpmcorrect
Torque277 Nmcorrect
Speed at max. torque1,396 rpmcorrect
Cylinders4correct
Displacement4,154 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,919 mmcorrect
Width1,975 mmcorrect
Height2,597 mmcorrect
Wheelbase2,388 mmcorrect
Ground clearance472 mmcorrect
Unladen weight3,460 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox15v/4rcorrect
Front tyres7.50-20 / 10-16 (LS)correct
Rear tyres16.9R34 / 16.9R30 (LS)correct
Top speed30 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct
Units built4620 (LS) / 3850 (LSA)correct

Where this model stands

Power-to-weight ratio: 14.9 kW/t (52 kW / 3.5 t)

Power class: Universal (40–100 hp)

Stronger than 48% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt Farmer 306 LS / LSA have?

The Fendt Farmer 306 LS / LSA delivers 70 hp.

How much does the Fendt Farmer 306 LS / LSA weigh?

The unladen weight is 3,460 kg.

What engine does the Fendt Farmer 306 LS / LSA have?

4 cylinders, 4,154 cm³ displacement, Diesel.

How fast does the Fendt Farmer 306 LS / LSA go?

Top speed is 30 km/h.

What are the dimensions of the Fendt Farmer 306 LS / LSA?

3,919 mm × 1,975 mm × 2,597 mm.

When was the Fendt Farmer 306 LS / LSA built?

Production years: 1980–1990.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare