Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Farmer 308

Fendt Farmer 308

Built: 1993–2001 · Series: Farmer 300

More machines from model year 1993

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Farmer 308, Fendt offers a model from the Farmer 300 series. Production: 1993–2001. The engine delivers 86 hp (63 kW), has 4 cylinders, with a displacement of 4,156 cm³. Torque is 353 Nm. Rated speed is 2,250 rpm. The machine is 4,040 mm long, 2,140 mm wide and 2,670 mm high. The unladen weight is 4,180 kg. The wheelbase measures 2,280 mm. Ground clearance is 490 mm. Top speed is 40 km/h. The tank holds 107 litres. Transmission: 21/21. The engine is water-cooled. Tyres: front 380/70 R 24, rear 480/70 R 34. The fuel is diesel. The bore measures 105 mm. The stroke is 120 mm. Maximum torque is reached at 1,500 rpm. Construction: semi-frame construction. The gearbox offers 21 forward gears. The linkage is category III. The PTO runs at 540/750/1000 rpm. Around 2084 units were built. The Farmer 300 series covers 21 models. Rated output within it ranges from 62 to 125 hp; the Farmer 308 sits in the lower part of that range with 86 hp. Its immediate neighbours are the Farmer 308 LSA Turbomatik below it with 78 hp and the Farmer 307 CI above it with 92 hp. Unladen weight within it ranges from 3,255 to 5,350 kg; here the Farmer 308 sits in the middle of that range with 4,180 kg. 1545 Fendt models across 89 series are on record.

Fendt Farmer 300 – the Marktoberdorf mid-range 1980–1999: 305 to 312, LS and LSA, Turbomatik, 46 to 92 kW

For two decades the Farmer 300 was Fendt's mid-range and the tractor on which many family farms in southern Germany and Austria grew. The range appeared in 1980 as successor to the Farmer 200 and 100 types, gained the 305 to 312 models in a new cab in 1984, was revised in 1987 to the loader-friendly LSA generation and in 1993 to the Ci generation with a new bonnet and Turbomatik converter clutch, before the Farmer 400 Vario and later the 300 Vario followed in 1999. The engines – three-, four- and six-cylinder – were built by MWM, from the late 1980s at the Mannheim plant, which then belonged to Fendt's parent company Klöckner-Humboldt-Deutz.

Read on 3 more paragraphs

The type number gives the power step, the letters the equipment: LS stands for the powershift version with Turbomatik starting clutch, LSA for the same with four-wheel drive, C and CA for the simpler version without powershift, Compact for the lower overall height, Ci for the models from 1993. In the register the models run from 46 to 92 kW (62 to 125 hp) with 3,117 to 6,234 cm³ and three to six cylinders, 238 to 459 Nm of torque, unladen weights from 3,255 to 5,350 kg, lengths from 3,780 to 4,480 mm and heights from 2,597 to 2,820 mm.

The Turbomatik – a hydraulic converter clutch that takes up drive smoothly when starting and shifting – was Fendt's unique feature in this class and a reason for the Farmer 300's reputation as a clutch-sparing loader tractor.

Used Farmer 300s are sought-after tractors with stable prices. When buying, the condition of the MWM engine (cooling system, cylinder head on the six-cylinders), the Turbomatik and powershift transmission, the loader mounting and the front axle on four-wheel-drive models are what count.

Sources: SpecCodex register, model data: Fendt Farmer 300, Fendt (AGCO, Hersteller), Fendt Farmer (Wikipedia)

Technical data

Engine

Fueldieselcorrect
Power86 hp (63 kW)correct
Rated speed2,250 rpmcorrect
Torque353 Nmcorrect
Speed at max. torque1,500 rpmcorrect
Cylinders4correct
Displacement4,156 cm³correct
Bore105 mmcorrect
Stroke120 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length4,040 mmcorrect
Width2,140 mmcorrect
Height2,670 mmcorrect
Wheelbase2,280 mmcorrect
Ground clearance490 mmcorrect
Unladen weight4,180 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox21/21correct
Forward gears21correct
Front tyres380/70 R 24correct
Rear tyres480/70 R 34correct
Top speed40 km/hcorrect

Working data

Fuel tank capacity107 lcorrect

Origin and approval

Constructionsemi-frame constructioncorrect
Units built2,084correct

Other data

Linkage categoryCat IIIcorrect
PTO speed540/750/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 15.1 kW/t (63 kW / 4.2 t)

Power class: Universal (40–100 hp)

Stronger than 58% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt Farmer 308 have?

The Fendt Farmer 308 delivers 86 hp.

How much does the Fendt Farmer 308 weigh?

The unladen weight is 4,180 kg.

What engine does the Fendt Farmer 308 have?

4 cylinders, 4,156 cm³ displacement, Diesel.

How fast does the Fendt Farmer 308 go?

Top speed is 40 km/h.

What are the dimensions of the Fendt Farmer 308?

4,040 mm × 2,140 mm × 2,670 mm.

When was the Fendt Farmer 308 built?

Production years: 1993–2001.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 29 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare