Start › Tractors › Valmet › 102 er-Baureihe

Valmet 102 er-Baureihe

6 models in this series

The 102 er-Baureihe series from Valmet comprises 6 models. Rated output ranges from 49 to 102 hp.

Valmet 102 series (Finland) – the numbered tractors before the Valtra brand: 502 to 1102, A for four-wheel drive, three- and four-cylinder diesels of 2.7 to 4.2 litres, 36 to 75 kW, 2.6 to 3.9 t, 8.5 t gross

Valmet, part of the Finnish state engineering group Valtion Metallitehtaat, built field tractors from the early 1950s and was thus among the pioneers of the Finnish tractor industry; the range from 502 to 1102 follows a numbering logic Valmet used for decades, in which the leading digits rise with the size class. A marks four-wheel drive, Turbo the turbocharged version; Valmet's tractor business later merged into the Valtra brand, part of AGCO since 2004.

Read on 3 more paragraphs

The register lists 6 versions with 36 to 75 kW from three- and four-cylinder diesels of 2,685 to 4,177 cm³ at 2,100 to 2,300 rpm, torque from 171 to 319 Nm, unladen weights from 2,557 to 3,900 kg, a gross weight of 8,500 kg, lengths from 3,460 to 3,930 mm, widths from 1,769 to 1,980 mm and heights from 2,400 to 2,710 mm.

The 102 series was the tractor of Finnish and Nordic farming with its cold winters and smaller farm sizes, also exported to Scandinavia and Eastern Europe, before Valmet became an international tractor supplier through the Valtra brand and its link-up with AGCO.

On used tractors, engine and cold-start equipment, clutch and gearbox, the four-wheel-drive clutch on A models, hydraulics and linkage, brakes and sheet metal and cab for rust from damp and road salt count; parts now run through the Valtra dealer network as the successor brand.

Sources: SpecCodex register, model data: Valmet 102er-Baureihe, Valtra (AGCO, Nachfolgemarke von Valmet)

Models compared

6 of 6 models.

	1102 (-4)1973–1980	5021971–1982	6021978–1982	602 Turbo1980–1982	702 (A)1972–1980	702 S (A)1974–1979
Power	75 kW	36 kW	42.7 kW	48.5 kW	52.2 kW	66.9 kW
Rated speed	2,300 rpm	2,300 rpm	2,100 rpm	2,300 rpm	2,200 rpm	2,200 rpm
Linkage category	–	Cat II	Cat II	Cat II	–	–
Cylinders	4	3	3	3	4	4
Displacement	4,177 cm³	2,685 cm³	3,298 cm³	3,298 cm³	4,177 cm³	4,177 cm³
Torque	–	171 Nm	210 Nm	235 Nm	–	319 Nm
Fuel tank capacity	–	65 l	65 l	65 l	–	–
Forward gears	–	6	6	6	–	–
Reverse gears	–	2	2	2	–	–
Top speed	30 km/h	30 km/h	30 km/h	30 km/h	30 km/h	30 km/h
Wheelbase	2,320 mm	2,112 mm	2,112 mm	2,112 mm	2,240 mm	2,240 mm
Length	3,930 mm	3,548 mm	3,487 mm	3,460 mm	3,820 mm	3,820 mm
Width	1,980 mm	1,885 mm	1,769 mm	1,769 mm	1,869 mm	1,869 mm
Height	2,710 mm	2,400 mm	2,520 mm	2,500 mm	2,585 mm	2,515 mm
Unladen weight	3,900 kg	2,557 kg	2,780 kg	2,820 kg	3,365 kg	3,425 kg
Gross vehicle weight	–	8,500 kg	8,500 kg	–	–	–

Models

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

502

1971–1982 · 32 data points

The 102er series from Valmet includes the 502. Production: 1971–1982. The engine delivers 49 hp (36 kW), has 3...

602

1978–1982 · 33 data points

With the 602, Valmet offers a model from the 102er series. Production: 1978–1982. The engine delivers 58 hp (42.7...

702 (A)

1972–1980 · 20 data points

The 702 (A) from Valmet is part of the 102er series. Production: 1972–1980. The engine delivers 71 hp (52.2 kW), has...

702 S (A)

1974–1979 · 24 data points

The 102er series from Valmet includes the 702 S (A). Production: 1974–1979. The engine delivers 91 hp (66.9 kW), has...

Valmet1102 (-4)no photo

1102 (-4)

1973–1980 · 21 data points

With the 1102 (-4), Valmet offers a model from the 102er series. Production: 1973–1980. The engine delivers 102 hp...

Valmet602 Turbono photo

602 Turbo

1980–1982 · 29 data points

The 602 Turbo from Valmet is part of the 102er series. Production: 1980–1982. The engine delivers 66 hp (48.5 kW),...