Start › Tractors › Valmet › 1102 (-4)

Valmet 1102 (-4)

Built: 1973–1980 · Series: 102 er-Baureihe

More machines from model year 1973

The photo shows the 702 (A) from the same series. Source: https://vaihtokoneet.agritek.fi/agriteknew/maatalous/traktor

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 1102 (-4), Valmet offers a model from the 102er series. Production: 1973–1980. The engine delivers 102 hp (75 kW), has 4 cylinders, with a displacement of 4,177 cm³. Rated speed is 2,300 rpm. The machine is 3,930 mm long, 1,980 mm wide and 2,710 mm high. The unladen weight is 3,900 kg. The wheelbase measures 2,320 mm. Ground clearance is 520 mm. Top speed is 30 km/h. Transmission: 8 V/2 R and 16 V/4 R. The engine is water-cooled. Tyres: front 9.00-20 ASF (A: 14.9-24 AS), rear 18.4-34 AS. The fuel is diesel. The bore measures 108 mm. The stroke is 114 mm. Construction: frame construction. The 102 er-Baureihe series covers 6 models. Rated output within it ranges from 49 to 102 hp; the 1102 (-4) sits at the top of that range with 102 hp. Its immediate neighbours are the 702 S (A) below it with 91 hp. Unladen weight within it ranges from 2,557 to 3,900 kg; here the 1102 (-4) sits at the top of that range with 3,900 kg. 414 Valmet models across 21 series are on record.

Valmet 102 series (Finland) – the numbered tractors before the Valtra brand: 502 to 1102, A for four-wheel drive, three- and four-cylinder diesels of 2.7 to 4.2 litres, 36 to 75 kW, 2.6 to 3.9 t, 8.5 t gross

Valmet, part of the Finnish state engineering group Valtion Metallitehtaat, built field tractors from the early 1950s and was thus among the pioneers of the Finnish tractor industry; the range from 502 to 1102 follows a numbering logic Valmet used for decades, in which the leading digits rise with the size class. A marks four-wheel drive, Turbo the turbocharged version; Valmet's tractor business later merged into the Valtra brand, part of AGCO since 2004.

Read on 3 more paragraphs

The register lists 6 versions with 36 to 75 kW from three- and four-cylinder diesels of 2,685 to 4,177 cm³ at 2,100 to 2,300 rpm, torque from 171 to 319 Nm, unladen weights from 2,557 to 3,900 kg, a gross weight of 8,500 kg, lengths from 3,460 to 3,930 mm, widths from 1,769 to 1,980 mm and heights from 2,400 to 2,710 mm.

The 102 series was the tractor of Finnish and Nordic farming with its cold winters and smaller farm sizes, also exported to Scandinavia and Eastern Europe, before Valmet became an international tractor supplier through the Valtra brand and its link-up with AGCO.

On used tractors, engine and cold-start equipment, clutch and gearbox, the four-wheel-drive clutch on A models, hydraulics and linkage, brakes and sheet metal and cab for rust from damp and road salt count; parts now run through the Valtra dealer network as the successor brand.

Sources: SpecCodex register, model data: Valmet 102er-Baureihe, Valtra (AGCO, Nachfolgemarke von Valmet)

Technical data

Engine

Fuel	dieselcorrect
Power	102 hp (75 kW)correct
Rated speed	2,300 rpmcorrect
Cylinders	4correct
Displacement	4,177 cm³correct
Bore	108 mmcorrect
Stroke	114 mmcorrect
Cooling	water-cooledcorrect

Dimensions and weights

Length	3,930 mmcorrect
Width	1,980 mmcorrect
Height	2,710 mmcorrect
Wheelbase	2,320 mmcorrect
Ground clearance	520 mmcorrect
Unladen weight	3,900 kgcorrect

Drivetrain and chassis

Drive	rear- or four-wheel drivecorrect
Gearbox	8 V/2 R and 16 V/4 Rcorrect
Front tyres	9.00-20 ASF (A: 14.9-24 AS)correct
Rear tyres	18.4-34 AScorrect
Top speed	30 km/hcorrect

Origin and approval

Construction	frame constructioncorrect

Where this model stands

Power-to-weight ratio: 19.2 kW/t (75 kW / 3.9 t)

Power class: Large (100–180 hp)

Stronger than 67% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valmet 1102 (-4) have?

The Valmet 1102 (-4) delivers 102 hp.

How much does the Valmet 1102 (-4) weigh?

The unladen weight is 3,900 kg.

What engine does the Valmet 1102 (-4) have?

4 cylinders, 4,177 cm³ displacement, Diesel.

How fast does the Valmet 1102 (-4) go?

Top speed is 30 km/h.

What are the dimensions of the Valmet 1102 (-4)?

3,930 mm × 1,980 mm × 2,710 mm.

When was the Valmet 1102 (-4) built?

Production years: 1973–1980.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →