Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Ursus › Other models › Ursus 4514

Ursus 4514

Built: 1988 · Series: Other models

More machines from model year 1988

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ursus 4514 comes from Ursus. Production: 1988. The engine delivers 65 hp (48 kW), has 4 cylinders, with a displacement of 3,865 cm³. Torque is 250 Nm. Rated speed is 2,000 rpm. The machine is 3,935 mm long, 1,990 mm wide and 2,520 mm high. The unladen weight is 3,280 kg. The wheelbase measures 2,300 mm. Top speed is 35 km/h. Transmission: 8V / 2R. The engine is water-cooled. Tyres: front 11.2-24, rear 16.9-30. The fuel is diesel. The bore measures 98.4 mm. The stroke is 127 mm. Maximum torque is reached at 1,313 rpm. Rated output across the Ursus range ranges from 8 to 192.6 hp; the Ursus 4514 sits in the lower part of that range with 65 hp. Its immediate neighbours are the C-360 B below it with 60 hp and the 4512/4514 above it with 66 hp. Rated output across the Ursus range ranges from 5.9 to 141.7 kW; here the Ursus 4514 sits in the lower part of that range with 48 kW. 221 Ursus models across 12 series are on record.

Ursus — one brand, two licences, many relatives

Anyone looking at an Ursus rarely sees a purely in-house design. The brand's history is a history of licences — and that is precisely why parts are often easier to find than the production figures would suggest.

Read on 4 more paragraphs

In 1965 the Warsaw plant began building the C-4011 under a licence agreement with Zetor in Brno. At its heart sat the S-4001 engine, the Polish version of Zetor's Z-4001. That kinship runs through the ranges: the later C-360, built from 1976 and in the programme until the end of 1994, used the S-4003, the strongest engine of that family.

In 1974 a second licence followed — the British one from Massey Ferguson, together with the associated production plant. Models such as the MF 235, MF 255 and MF 265 were then built in Poland with Perkins engines and became a fixture on many farms. The higher Ursus ranges with four-digit numbers descend from this line.

One remarkable long-runner stands out: the C-325 and its revised versions C-328 and C-330 — popularly the "thirties" — plus the C-335 export version, ran without interruption for 34 years until 1993.

When buying used it is therefore worth establishing the range's ancestry first. An Ursus from the Zetor line shares engine parts with Czech machines, one from the Massey Ferguson line with British ones. That decides where to look for components.

Sources: warzywa.pl, Wiadomości Rolnicze Polska, ursus.info.pl

Technical data

Engine

Fueldieselcorrect
Power65 hp (48 kW)correct
Rated speed2,000 rpmcorrect
Torque250 Nmcorrect
Speed at max. torque1,313 rpmcorrect
Cylinders4correct
Displacement3,865 cm³correct
Bore98.4 mmcorrect
Stroke127 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,935 mmcorrect
Width1,990 mmcorrect
Height2,520 mmcorrect
Wheelbase2,300 mmcorrect
Unladen weight3,280 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox8V / 2Rcorrect
Front tyres11.2-24correct
Rear tyres16.9-30correct
Top speed35 km/hcorrect

Where this model stands

Power-to-weight ratio: 14.6 kW/t (48 kW / 3.3 t)

Power class: Universal (40–100 hp)

Stronger than 45% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ursus Ursus 4514 have?

The Ursus Ursus 4514 delivers 65 hp.

How much does the Ursus Ursus 4514 weigh?

The unladen weight is 3,280 kg.

What engine does the Ursus Ursus 4514 have?

4 cylinders, 3,865 cm³ displacement, Diesel.

How fast does the Ursus Ursus 4514 go?

Top speed is 35 km/h.

What are the dimensions of the Ursus Ursus 4514?

3,935 mm × 1,990 mm × 2,520 mm.

When was the Ursus Ursus 4514 built?

Production years: 1988.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare