Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Landini › Landpower › Landpower 165

Landini Landpower 165

Series: Landpower

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Landpower 165, Landini offers a model from the Landpower series. The engine delivers 157 hp (116 kW), has 6 cylinders, with a displacement of 6,728 cm³. The machine is 5,450 mm long, 2,384 mm wide and 2,810 mm high. The unladen weight is 6,250 kg. The wheelbase measures 2,800 mm. The tank holds 260 litres. Tyres: rear 600/65R38. The Landpower series covers 16 models. Rated output within it ranges from 117 to 186 hp; the Landpower 165 sits in the middle of that range with 157 hp. Its immediate neighbours are the 145 below it with 141 hp and the Landpower 145 TDI Dual Power above it with 157.1 hp. Unladen weight within it ranges from 5,787.8 to 6,250 kg; here the Landpower 165 sits at the top of that range with 6,250 kg. 222 Landini models across 35 series are on record.

Landini Landpower (1998–2010s) – the six-cylinders from Fabbrico: Landpower 125 to 185, TDI for turbo intercooling, T3 for Tier 3, Dual Power, Perkins 1106 of 6 litres, 86 to 137 kW

The Landpower was Landini's large tractor of the years after the takeover by the Argo group in 1994 – the range with which the maker from Fabbrico pushed above the Legend models into the 120 to 185 hp class where arable farms and contractors buy. The type logic: the number roughly gives the output in hp – Landpower 125, 135, 145, 165, 180 and 185 – TDI marks the version with turbocharger and charge-air cooling, T3 the generation with Tier 3 engines from 2007, Dual Power a version with power boost for PTO and transport work. The engines are Perkins 1106-series six-cylinders of 6 litres, as Argo also used in the McCormick MTX sister models.

Read on 3 more paragraphs

The register lists 16 versions with 86 to 136.8 kW (117 to 171 hp) from six-cylinders of 5,981 to 6,728 cm³ at 2,200 rpm, PTO outputs of 107 to 165 hp, unladen weights from 5,788 to 6,250 kg, lengths from 5,145 to 5,450 mm, widths from 2,060 to 2,486 mm and heights from 2,780 to 2,810 mm.

The Landpowers were the first Landinis with full-frame construction and powershift in this class – the design Argo also used at McCormick after buying it in 2001; the Perkins engines secure parts through any Perkins network.

On used tractors, operating hours, engine condition, the powershift (clutch packs), hydraulics and front axle and the cab electrics count; parts run through Argo dealers and Perkins.

Sources: SpecCodex register, model data: Landini Landpower, Landini (Argo Tractors, Hersteller)

Technical data

Engine

Power157 hp (116 kW)correct
Cylinders6correct
Displacement6,728 cm³correct

Dimensions and weights

Length5,450 mmcorrect
Width2,384 mmcorrect
Height2,810 mmcorrect
Wheelbase2,800 mmcorrect
Unladen weight6,250 kgcorrect

Drivetrain and chassis

Rear tyres600/65R38correct

Working data

Fuel tank capacity260 lcorrect

Where this model stands

Power-to-weight ratio: 18.6 kW/t (116 kW / 6.2 t)

Power class: Large (100–180 hp)

Stronger than 85% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Landini Landpower 165 have?

The Landini Landpower 165 delivers 157 hp.

How much does the Landini Landpower 165 weigh?

The unladen weight is 6,250 kg.

What engine does the Landini Landpower 165 have?

6 cylinders, 6,728 cm³ displacement.

What are the dimensions of the Landini Landpower 165?

5,450 mm × 2,384 mm × 2,810 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare