Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Landini › Landpower › Landpower 125

Landini Landpower 125

Built: 2005 · Series: Landpower

More machines from model year 2005

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Landpower series from Landini includes the Landpower 125. Production: 2005. The engine delivers 117 hp (86 kW), has 6 cylinders, with a displacement of 6,728 cm³. The machine is 5,145 mm long, 2,060 mm wide and 2,780 mm high. The unladen weight is 5,800 kg. The wheelbase measures 2,800 mm. Ground clearance is 520 mm. The tank holds 260 litres. Tyres: rear 480/70R38. The Landpower series covers 16 models. Rated output within it ranges from 117 to 186 hp; the Landpower 125 sits at the bottom of that range with 117 hp. Its immediate neighbours are the Landpower 125 TDI above it with 119.2 hp. Unladen weight within it ranges from 5,787.8 to 6,250 kg; here the Landpower 125 sits at the bottom of that range with 5,800 kg. 222 Landini models across 35 series are on record.

Landini Landpower (1998–2010s) – the six-cylinders from Fabbrico: Landpower 125 to 185, TDI for turbo intercooling, T3 for Tier 3, Dual Power, Perkins 1106 of 6 litres, 86 to 137 kW

The Landpower was Landini's large tractor of the years after the takeover by the Argo group in 1994 – the range with which the maker from Fabbrico pushed above the Legend models into the 120 to 185 hp class where arable farms and contractors buy. The type logic: the number roughly gives the output in hp – Landpower 125, 135, 145, 165, 180 and 185 – TDI marks the version with turbocharger and charge-air cooling, T3 the generation with Tier 3 engines from 2007, Dual Power a version with power boost for PTO and transport work. The engines are Perkins 1106-series six-cylinders of 6 litres, as Argo also used in the McCormick MTX sister models.

Read on 3 more paragraphs

The register lists 16 versions with 86 to 136.8 kW (117 to 171 hp) from six-cylinders of 5,981 to 6,728 cm³ at 2,200 rpm, PTO outputs of 107 to 165 hp, unladen weights from 5,788 to 6,250 kg, lengths from 5,145 to 5,450 mm, widths from 2,060 to 2,486 mm and heights from 2,780 to 2,810 mm.

The Landpowers were the first Landinis with full-frame construction and powershift in this class – the design Argo also used at McCormick after buying it in 2001; the Perkins engines secure parts through any Perkins network.

On used tractors, operating hours, engine condition, the powershift (clutch packs), hydraulics and front axle and the cab electrics count; parts run through Argo dealers and Perkins.

Sources: SpecCodex register, model data: Landini Landpower, Landini (Argo Tractors, Hersteller)

Technical data

Engine

Power117 hp (86 kW)correct
Cylinders6correct
Displacement6,728 cm³correct

Dimensions and weights

Length5,145 mmcorrect
Width2,060 mmcorrect
Height2,780 mmcorrect
Wheelbase2,800 mmcorrect
Ground clearance520 mmcorrect
Unladen weight5,800 kgcorrect

Drivetrain and chassis

Rear tyres480/70R38correct

Working data

Fuel tank capacity260 lcorrect

Where this model stands

Power-to-weight ratio: 14.8 kW/t (86 kW / 5.8 t)

Power class: Large (100–180 hp)

Stronger than 73% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Landini Landpower 125 have?

The Landini Landpower 125 delivers 117 hp.

How much does the Landini Landpower 125 weigh?

The unladen weight is 5,800 kg.

What engine does the Landini Landpower 125 have?

6 cylinders, 6,728 cm³ displacement.

What are the dimensions of the Landini Landpower 125?

5,145 mm × 2,060 mm × 2,780 mm.

When was the Landini Landpower 125 built?

Production years: 2005.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare