Start › Excavators & compaction › Kato › HD2045III

Kato HD2045III

Series: Kato Hydraulic Excavator

Source: https://www.technikboerse.com/gebraucht/bagger-789/kato-611

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the HD2045III, Kato offers a model from the Kato Hydraulic Excavator series. The engine delivers 319.6 hp (235 kW), has 6 cylinders, with a displacement of 11,941.3 cm³. Torque is 1,245 Nm. The unladen weight is 46,200 kg. Ground clearance is 701 mm. The tank holds 605.3 litres. The pump delivers 740 l/min. The hydraulic tank holds 610.2 litres. Working pressure is 309 bar. The cooling system holds 49.2 litres. The oil fill is 49.2 litres. The electrical system runs on 24 V. The engine fitted is the C 6D24-TLE2A. The Kato Hydraulic Excavator series covers 40 models. Rated output within it ranges from 83 to 319.6 hp; the HD2045III sits at the top of that range with 319.6 hp. Its immediate neighbours are the HD2045II below it with 310 hp. 62 Kato models across 5 series are on record. The model is listed under Excavators & compaction. 17 verified figures from 1 source are on file.

Technical data

Engine

Engine modelC 6D24-TLE2Acorrect
Power319.6 hp (235 kW)correct
Torque1,245correct
Cylinders6correct
Displacement11,941.3 cm³correct
Aspirationturbochargedcorrect
Coolant capacity49.2 lcorrect
Engine oil capacity49.2 lcorrect

Dimensions and weights

Ground clearance701correct
Unladen weight46,200 kgcorrect

Drivetrain and chassis

System voltage24 Vcorrect

Working data

Pump flow740 l/mincorrect
Hydraulic oil capacity610.2 lcorrect
Hydraulic pressure309 barcorrect
Fuel tank capacity605.3 lcorrect

Other data

Height3,282.7correct

Where this model stands

Power-to-weight ratio: 5.1 kW/t (235 kW / 46.2 t)

Stronger than 87% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kato HD2045III have?

The Kato HD2045III delivers 320 hp.

How much does the Kato HD2045III weigh?

The unladen weight is 46,200 kg.

What engine does the Kato HD2045III have?

6 cylinders, 11,941 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

HD1023

HD1023II

HD1023III

HD1023IIILC

HD1023IILC

HD1023LC

HD1250VII

HD1250VIILC

HD1430

HD1430III

HD1430IIILC

HD1430LC

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare