Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Mobile & rough terrain cranes › Grove › GMK 5095

Grove GMK 5095

Built: 2009-2016 · Series: GMK

More machines from model year 2009

The photo shows the GMK 4100 L from the same series. Source: https://www.agritrader.eu/construction-machinery/crane/grove

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the GMK 5095, Grove offers a model from the GMK series. Production: 2009-2016. The engine delivers 380 kW, has 8 cylinders, with a displacement of 15,930 cm³. The unladen weight is 59,750 kg. The wheelbase measures 7,840 mm. Top speed is 85 km/h. The gross vehicle weight is 60,000 kg. The machine runs on 10 wheels. The GMK series covers 52 models. Rated output within it ranges from 205 to 420 kW; the GMK 5095 sits in the upper part of that range with 380 kW. Its immediate neighbours are the GMK 5130 below it with 375 kW and the GMK 6400 above it with 405.1 kW. Unladen weight within it ranges from 26,570 to 77,000 kg; here the GMK 5095 sits in the upper part of that range with 59,750 kg. 364 Grove models across 11 series are on record.

Grove GMK – collective page of the all-terrain cranes: American maker, part of Manitowoc since 2002, lifting capacity in tonnes coded in the type name, 205 to 420 kW

This page gathers the Grove GMK range, all-terrain cranes from the American maker Grove, founded in 1947 in Shady Grove, Pennsylvania, and part of the Manitowoc Crane Group since 2002. GMK denotes the all-terrain crane range; the following number roughly gives the maximum lifting capacity in tonnes – GMK4080 about 80 tonnes, GMK5220 about 220 tonnes, GMK6400 about 400 tonnes – the suffix after the hyphen the axle-count sub-variant or development step, and L an extended-boom version.

Read on 3 more paragraphs

The register lists here 48 versions with outputs from 205 to 420 kW, displacements from 6,370 to 21,900 cm³ from six- to eight-cylinders, operating weights from 23,750 to 77,000 kg against gross weights of 24,000 to 72,000 kg and widths from 2,500 to 3,000 mm; torque is recorded for a handful of entries at 580 to 2,600 Nm at 1,800 rpm.

Alongside Liebherr and Tadano, Grove is one of the leading suppliers of all-terrain cranes, and with the GMK range covers the spectrum from the compact two-axle crane to the large crane for industrial and wind-turbine assembly work; the cranes drive to the job site on public roads and then work off-road there without a separate low-loader.

On used examples, engine and crane-gear operating hours, the condition of the telescopic sections, cable drums and outriggers, the tightness of the hydraulic cylinders, and rust on the frame and boom segments all count; parts and service run through the Manitowoc-Grove network.

Sources: SpecCodex register, model data: Grove GMK, Manitowoc (Grove, Hersteller)

Technical data

Engine

Power380 kWcorrect
Cylinders8correct
Displacement15,930 cm³correct

Dimensions and weights

Wheelbase7,840 mmcorrect
Unladen weight59,750 kgcorrect
Gross vehicle weight60,000 kgcorrect

Drivetrain and chassis

Wheels10correct
Top speed85 km/hcorrect

Where this model stands

Power-to-weight ratio: 6.4 kW/t (380 kW / 59.8 t)

Stronger than 81% of the mobile & rough terrain cranes in the register — out of 723 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Grove GMK 5095 have?

The Grove GMK 5095 delivers 380 kW.

How much does the Grove GMK 5095 weigh?

The unladen weight is 59,750 kg.

What is the gross vehicle weight of the Grove GMK 5095?

60,000 kg.

What engine does the Grove GMK 5095 have?

8 cylinders, 15,930 cm³ displacement.

How fast does the Grove GMK 5095 go?

Top speed is 85 km/h.

When was the Grove GMK 5095 built?

Production years: 2009-2016.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

GMK

GMK 2035 E

GMK 3050

GMK 3050-3

GMK 3055

GMK 3055/3050 -1

GMK 3060 L

GMK 3060-1

GMK 3060L-1

GMK 4070L

GMK 4075-8X6/165+210+165

GMK 4080-1

Sources: [1]

Mobile crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare