Technical register for agricultural, construction and commercial machinery · sourced data
Start › Mobile & rough terrain cranes › Grove › GMK › GMK 6400

Grove GMK 6400

Built: 2013-2018 · Series: GMK

More machines from model year 2013

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Grove GMK 6400 belongs to the GMK series. Production: 2013-2018. The engine delivers 550.7 hp (405.1 kW), has 8 cylinders, with a displacement of 15,928 cm³. Torque is 2,600.1 Nm. Rated speed is 1,800 rpm. The unladen weight is 71,750 kg. The wheelbase measures 10,950 mm. Ground clearance is 451.1 mm. Top speed is 85 km/h. The gross vehicle weight is 72,000 kg. The machine runs on 12 wheels. Maximum torque is reached at 1,300 rpm. The electrical system runs on 24 V. Tyre size: 445/95 R25. The GMK series covers 52 models. Rated output within it ranges from 353.8 to 550.7 hp; the GMK 6400 sits at the top of that range with 550.7 hp. Its immediate neighbours are the GMK 5100 below it with 475.5 hp. Unladen weight within it ranges from 35,825 to 71,750 kg; here the GMK 6400 sits at the top of that range with 71,750 kg. 364 Grove models across 11 series are on record.

Grove GMK – collective page of the all-terrain cranes: American maker, part of Manitowoc since 2002, lifting capacity in tonnes coded in the type name, 205 to 420 kW

This page gathers the Grove GMK range, all-terrain cranes from the American maker Grove, founded in 1947 in Shady Grove, Pennsylvania, and part of the Manitowoc Crane Group since 2002. GMK denotes the all-terrain crane range; the following number roughly gives the maximum lifting capacity in tonnes – GMK4080 about 80 tonnes, GMK5220 about 220 tonnes, GMK6400 about 400 tonnes – the suffix after the hyphen the axle-count sub-variant or development step, and L an extended-boom version.

Read on 3 more paragraphs

The register lists here 48 versions with outputs from 205 to 420 kW, displacements from 6,370 to 21,900 cm³ from six- to eight-cylinders, operating weights from 23,750 to 77,000 kg against gross weights of 24,000 to 72,000 kg and widths from 2,500 to 3,000 mm; torque is recorded for a handful of entries at 580 to 2,600 Nm at 1,800 rpm.

Alongside Liebherr and Tadano, Grove is one of the leading suppliers of all-terrain cranes, and with the GMK range covers the spectrum from the compact two-axle crane to the large crane for industrial and wind-turbine assembly work; the cranes drive to the job site on public roads and then work off-road there without a separate low-loader.

On used examples, engine and crane-gear operating hours, the condition of the telescopic sections, cable drums and outriggers, the tightness of the hydraulic cylinders, and rust on the frame and boom segments all count; parts and service run through the Manitowoc-Grove network.

Sources: SpecCodex register, model data: Grove GMK, Manitowoc (Grove, Hersteller)

Technical data

Engine

Power550.7 hp (405.1 kW)correct
Rated speed1,800 rpmcorrect
Torque2,600.1 Nmcorrect
Speed at max. torque1,300 rpmcorrect
Cylinders8correct
Displacement15,928 cm³correct

Dimensions and weights

Wheelbase10,950 mmcorrect
Ground clearance451.1 mmcorrect
Unladen weight71,750 kgcorrect
Gross vehicle weight72,000 kgcorrect

Drivetrain and chassis

Gearbox typeZF AS Troniccorrect
Wheels12correct
Tyre size445/95 R25correct
Top speed85 km/hcorrect

Other data

System voltage24 Vcorrect

Where this model stands

Power-to-weight ratio: 5.6 kW/t (405 kW / 71.8 t)

Stronger than 92% of the mobile & rough terrain cranes in the register — out of 723 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Grove GMK 6400 have?

The Grove GMK 6400 delivers 551 hp.

How much does the Grove GMK 6400 weigh?

The unladen weight is 71,750 kg.

What is the gross vehicle weight of the Grove GMK 6400?

72,000 kg.

What engine does the Grove GMK 6400 have?

8 cylinders, 15,928 cm³ displacement.

How fast does the Grove GMK 6400 go?

Top speed is 85 km/h.

When was the Grove GMK 6400 built?

Production years: 2013-2018.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Mobile crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare