Grove GMK 3060 L – specifications
Built: 2020-2025 · Series: GMK
The GMK 3060 L from Grove is part of the GMK series. Production: 2020-2025. The engine has 6 cylinders, with a displacement of 8,898 cm³. The machine is 10,880 mm long and 2,750 mm wide. The unladen weight is 35,750 kg. The wheelbase measures 4,450 mm. Top speed is 85 km/h. The gross vehicle weight is 36,000 kg. The machine runs on 6 wheels. The GMK series covers 52 models. Unladen weight within it ranges from 23,750 to 77,000 kg; the GMK 3060 L sits in the lower part of that range with 35,750 kg. Its immediate neighbours are the GMK 2035 below it with 26,570 kg and the GMK 3055 above it with 35,825 kg. Gross vehicle weight within it ranges from 24,000 to 72,000 kg; here the GMK 3060 L sits in the lower part of that range with 36,000 kg. 364 Grove models across 11 series are on record.
Data for the version built 2020-2025 · Data origin: Official register · sources
More machines from model year 2020
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Grove GMK – collective page of the all-terrain cranes: American maker, part of Manitowoc since 2002, lifting capacity in tonnes coded in the type name, 205 to 420 kW
This page gathers the Grove GMK range, all-terrain cranes from the American maker Grove, founded in 1947 in Shady Grove, Pennsylvania, and part of the Manitowoc Crane Group since 2002. GMK denotes the all-terrain crane range; the following number roughly gives the maximum lifting capacity in tonnes – GMK4080 about 80 tonnes, GMK5220 about 220 tonnes, GMK6400 about 400 tonnes – the suffix after the hyphen the axle-count sub-variant or development step, and L an extended-boom version.
Read on 3 more paragraphs
The register lists here 48 versions with outputs from 205 to 420 kW, displacements from 6,370 to 21,900 cm³ from six- to eight-cylinders, operating weights from 23,750 to 77,000 kg against gross weights of 24,000 to 72,000 kg and widths from 2,500 to 3,000 mm; torque is recorded for a handful of entries at 580 to 2,600 Nm at 1,800 rpm.
Alongside Liebherr and Tadano, Grove is one of the leading suppliers of all-terrain cranes, and with the GMK range covers the spectrum from the compact two-axle crane to the large crane for industrial and wind-turbine assembly work; the cranes drive to the job site on public roads and then work off-road there without a separate low-loader.
On used examples, engine and crane-gear operating hours, the condition of the telescopic sections, cable drums and outriggers, the tightness of the hydraulic cylinders, and rust on the frame and boom segments all count; parts and service run through the Manitowoc-Grove network.
Sources: SpecCodex register, model data: Grove GMK, Manitowoc (Grove, Hersteller)
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 8,898 cm³correct |
Dimensions and weights
| Length | 10,880 mmcorrect |
|---|---|
| Width | 2,750 mmcorrect |
| Wheelbase | 4,450 mmcorrect |
| Unladen weight | 35,750 kgcorrect |
| Gross vehicle weight | 36,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 85 km/hcorrect |
Frequently asked questions
Used listings – figures from public listings
Between April and November 2026, speccodex recorded 3 public used-machine listings for Grove GMK 3060 L on one platform. Year of manufacture: 2020.
Asking prices are sellers' demands, not achieved sale prices. Basis: public listings, recorded and analysed by speccodex. As of: 22 Nov 2026.
Area: Machines › Construction machinery
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
GMK 2035 E
GMK 3050
GMK 3050-3
GMK 3055
GMK 3055/3050 -1
GMK 3060-1
GMK 3060L-1
GMK 4070L
GMK 4080-1
GMK 4080-2
GMK 4080-3
GMK 4080L
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Mobile crane in 3D section
Turn the model, look inside and click an assembly — each one is explained.