Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fiat Trattori › Diamant-Serie › 215 (DT)

Fiat Trattori 215 (DT)

Built: 1965–1968 · Series: Diamant-Serie

More machines from model year 1965

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 215 (DT), Fiat Trattori offers a model from the Diamant series. Production: 1965–1968. The engine delivers 22 hp (16.2 kW), has 2 cylinders, with a displacement of 1,135 cm³. Torque is 63 Nm. Rated speed is 2,300 rpm. The machine is 2,601 mm long, 1,230 mm wide and 1,311 mm high. The unladen weight is 970 kg. The wheelbase measures 1,699 mm. Ground clearance is 450 mm. Top speed is 22 km/h. Transmission: 6 V/2 R. The engine is water-cooled. Tyres: front 5.50-15 ASF (DT: 7.50-16 AS), rear 9.5-24 AS. The fuel is diesel. The bore measures 85 mm. The stroke is 100 mm. The compression ratio is 21.5:1. Maximum torque is reached at 1,800 rpm. Injection pressure is 117 bar. The Diamant-Serie series covers 4 models. Rated output within it ranges from 22 to 67 hp; the 215 (DT) sits at the bottom of that range with 22 hp. Its immediate neighbours are the 415 (DT) above it with 45 hp. Unladen weight within it ranges from 970 to 2,880 kg; here the 215 (DT) sits at the bottom of that range with 970 kg. 99 Fiat Trattori models across 9 series are on record.

Fiat Trattori Diamant series – Italian classics of the 1960s: twin- to four-cylinder diesels at 1,135 to 4,397 cc, 16.2 to 49.3 kW, types 215, 415, 615 and 715 (DT)

The Diamant series brought together at Fiat Trattori in Turin during the 1960s a model line from small tractor to mid-range, graded through the types 215, 415, 615 and 715. The number denotes the ascending power class, and the DT suffix the four-wheel-drive version (Doppia Trazione); the base types without DT were rear-wheel drive only. Fiat built at this time both in Turin and at its agricultural machinery site in Modena, covering with the Diamant series a wide field from small vineyard tractors to mid-power field tractors.

Read on 3 more paragraphs

The register lists 4 versions with 16.2 to 49.3 kW from twin- to four-cylinders of 1,135 to 4,397 cc displacement at 1,900 to 2,500 rpm; torque ranges from 63 to 260 Nm. Unladen weights lie between 970 and 2,880 kg, lengths between 2,601 and 3,730 mm, widths between 1,230 and 1,960 mm, and heights between 1,311 and 1,870 mm.

With its wide spread of power and dimensions, the Diamant series covered both smallholdings and special crops as well as larger arable farms, competing directly with the contemporaneous models from Same, Lamborghini and Landini, likewise from northern Italy.

On a used purchase of an older Diamant type, check corrosion on sheet metal and steering knuckles, the condition of the clutch and mechanical gearbox, and on DT four-wheel-drive versions the front-axle drive; parts for the Italian four-cylinders, less so for the twin-cylinders, are usually still obtainable through specialist dealers.

Sources: SpecCodex register, model data: Fiat Trattori Diamant-Serie

Technical data

Engine

Fueldieselcorrect
Power22 hp (16.2 kW)correct
Rated speed2,300 rpmcorrect
Torque63 Nmcorrect
Speed at max. torque1,800 rpmcorrect
Cylinders2correct
Displacement1,135 cm³correct
Bore85 mmcorrect
Stroke100 mmcorrect
Compression ratio21.5correct
Injection pressure117 barcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length2,601 mmcorrect
Width1,230 mmcorrect
Height1,311 mmcorrect
Wheelbase1,699 mmcorrect
Ground clearance450 mmcorrect
Unladen weight970 kgcorrect

Drivetrain and chassis

Driverear- or four-wheel drivecorrect
Gearbox6 V/2 Rcorrect
Front tyres5.50-15 ASF (DT: 7.50-16 AS)correct
Rear tyres9.5-24 AScorrect
Top speed22 km/hcorrect

Where this model stands

Power-to-weight ratio: 16.7 kW/t (16 kW / 1 t)

Power class: Compact (< 40 hp)

Stronger than 9% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fiat Trattori 215 (DT) have?

The Fiat Trattori 215 (DT) delivers 22 hp.

How much does the Fiat Trattori 215 (DT) weigh?

The unladen weight is 970 kg.

What engine does the Fiat Trattori 215 (DT) have?

2 cylinders, 1,135 cm³ displacement, Diesel.

How fast does the Fiat Trattori 215 (DT) go?

Top speed is 22 km/h.

What are the dimensions of the Fiat Trattori 215 (DT)?

2,601 mm × 1,230 mm × 1,311 mm.

When was the Fiat Trattori 215 (DT) built?

Production years: 1965–1968.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare