Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Eicher › 3453

Eicher 3453

Built: 1974–1978 · Series: 3000

More machines from model year 1974

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Eicher 3453 is a model in the 3000 series. Production: 1974–1978. The engine delivers 65 hp (48 kW), has 4 cylinders, with a displacement of 3,844 cm³. Rated speed is 2,000 rpm. The machine is 2,005 mm wide and 2,480 mm high. The unladen weight is 3,000 kg. Top speed is 25 km/h. The engine is water-cooled. Tyres: front 7.50 - 16, rear 16.9 - 34. The fuel is diesel. Construction: frameless unit construction. Around 699 units were built. The 3000 series covers 6 models. Rated output within it ranges from 35 to 95 hp; the 3453 sits in the middle of that range with 65 hp. Its immediate neighbours are the 3048 AS below it with 48 hp and the 3014 Wotan II A above it with 95 hp. Unladen weight within it ranges from 1,935 to 4,140 kg; here the 3453 sits in the middle of that range with 3,000 kg. 196 Eicher models across 41 series are on record.

Eicher 3000 – mid-range line from Forstern near Munich: 3014 Wotan II A to 3453, two- to six-cylinder diesels rated 26–70 kW, 1,935–4,140 kg

The Eicher 3000 brings together mid-range series from the Bavarian maker Eicher of Forstern near Munich, whose four-digit type numbers begin with the digit 3. Eicher had built tractors since the 1930s and gave some series their own names, such as Wotan, as seen on the 3014 Wotan II A; the AS and S suffixes on the 3048 mark different equipment grades of the same base version. From the 3014 as the smallest to the 3453 as the largest model, the line spans two- to six-cylinder engines.

Read on 3 more paragraphs

The register lists 6 versions rated at 26 to 69.6 kW (35 to 65 hp) from two- to six-cylinder engines of 1,963 to 5,890 cm³, torque of 365 Nm, kerb weights of 1,935 to 4,140 kg, and a length of 3,220 to 4,080 mm, a width of 1,540 to 2,090 mm and a height of 1,725 to 2,480 mm, at speeds of 2,000 to 2,150 rpm.

The Eicher 3000 tractors were standard workhorses for medium-sized farms in Bavaria and southern Germany, competing on power and price with Fendt, Deutz and the large international makes; after Massey Ferguson took over the tractor division, independent production under the Eicher name in Germany ended.

On these older tractors, check engine and radiator condition, the clutch and mechanical gearbox, the hydraulics with lift, and corrosion on the wings, bonnet and frame; spares are available through specialist Eicher parts dealers and vintage farm-machinery markets, and a test drive checking steering and brakes is advisable before buying.

Sources: SpecCodex register, model data: Eicher 3000

Technical data

Engine

Fueldieselcorrect
Power65 hp (48 kW)correct
Rated speed2,000 rpmcorrect
Cylinders4correct
Displacement3,844 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Width2,005 mmcorrect
Height2,480 mmcorrect
Unladen weight3,000 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox10 Vor- + 2 Rückwärtsgängecorrect
Front tyres7.50 - 16correct
Rear tyres16.9 - 34correct
Top speed25 km/hcorrect

Origin and approval

Constructionframeless unit constructioncorrect
Units built699correct

Where this model stands

Power-to-weight ratio: 16 kW/t (48 kW / 3 t)

Power class: Universal (40–100 hp)

Stronger than 45% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Eicher 3453 have?

The Eicher 3453 delivers 65 hp.

How much does the Eicher 3453 weigh?

The unladen weight is 3,000 kg.

What engine does the Eicher 3453 have?

4 cylinders, 3,844 cm³ displacement, Diesel.

How fast does the Eicher 3453 go?

Top speed is 25 km/h.

What are the dimensions of the Eicher 3453?

2,005 mm × 2,480 mm.

When was the Eicher 3453 built?

Production years: 1974–1978.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare