Eicher 3035
Built: 1990 · Series: 3000
More machines from model year 1990
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Eicher 3000 – mid-range line from Forstern near Munich: 3014 Wotan II A to 3453, two- to six-cylinder diesels rated 26–70 kW, 1,935–4,140 kg
The Eicher 3000 brings together mid-range series from the Bavarian maker Eicher of Forstern near Munich, whose four-digit type numbers begin with the digit 3. Eicher had built tractors since the 1930s and gave some series their own names, such as Wotan, as seen on the 3014 Wotan II A; the AS and S suffixes on the 3048 mark different equipment grades of the same base version. From the 3014 as the smallest to the 3453 as the largest model, the line spans two- to six-cylinder engines.
Read on 3 more paragraphs
The register lists 6 versions rated at 26 to 69.6 kW (35 to 65 hp) from two- to six-cylinder engines of 1,963 to 5,890 cm³, torque of 365 Nm, kerb weights of 1,935 to 4,140 kg, and a length of 3,220 to 4,080 mm, a width of 1,540 to 2,090 mm and a height of 1,725 to 2,480 mm, at speeds of 2,000 to 2,150 rpm.
The Eicher 3000 tractors were standard workhorses for medium-sized farms in Bavaria and southern Germany, competing on power and price with Fendt, Deutz and the large international makes; after Massey Ferguson took over the tractor division, independent production under the Eicher name in Germany ended.
On these older tractors, check engine and radiator condition, the clutch and mechanical gearbox, the hydraulics with lift, and corrosion on the wings, bonnet and frame; spares are available through specialist Eicher parts dealers and vintage farm-machinery markets, and a test drive checking steering and brakes is advisable before buying.
Sources: SpecCodex register, model data: Eicher 3000
Technical data
Engine
| Power | 35 hp (26 kW)correct |
|---|---|
| Rated speed | 2,100 rpmcorrect |
| Cylinders | 2correct |
| Displacement | 1,963 cm³correct |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 3,220 mmcorrect |
|---|---|
| Width | 1,540 mmcorrect |
| Height | 2,140 mmcorrect |
| Wheelbase | 1,910 mmcorrect |
| Ground clearance | 320 mmcorrect |
| Unladen weight | 1,935 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Forward gears | 11correct |
| Reverse gears | 2correct |
| Front tyres | 7.50L-15correct |
| Rear tyres | 12.4-28correct |
| Top speed | 30 km/hcorrect |
Where this model stands
Power-to-weight ratio: 13.4 kW/t (26 kW / 1.9 t)
Power class: Compact (< 40 hp)
Stronger than 21% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Eicher 3035 have?
The Eicher 3035 delivers 35 hp.
How much does the Eicher 3035 weigh?
The unladen weight is 1,935 kg.
What engine does the Eicher 3035 have?
2 cylinders, 1,963 cm³ displacement.
How fast does the Eicher 3035 go?
Top speed is 30 km/h.
What are the dimensions of the Eicher 3035?
3,220 mm × 1,540 mm × 2,140 mm.
When was the Eicher 3035 built?
Production years: 1990.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.