Technical register for agricultural, construction and commercial machinery · sourced data

Doosan DX350LC-5

Series: Doosan Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Doosan Hydraulic Excavator series from Doosan includes the DX350LC-5. The engine delivers 322.4 hp (233.4 kW), has 5 cylinders, with a displacement of 9,301.3 cm³. The engine comes from Scania. Torque is 1,324.1 Nm. Rated speed is 1,800 rpm. The unladen weight is 36,584 kg. The tank holds 600.4 litres. Maximum torque is reached at 1,300 rpm. The hydraulic tank holds 450.1 litres. The cooling system holds 52.2 litres. The oil fill is 36.3 litres. The engine fitted is the DC09. The Doosan Hydraulic Excavator series covers 30 models. Rated output within it ranges from 100.4 to 385.3 hp; the DX350LC-5 sits in the upper part of that range with 322.4 hp. Its immediate neighbours are the DX300LC-5 below it with 274.8 hp and the DX420LC-5 above it with 349.8 hp. Unladen weight within it ranges from 13,900 to 52,878 kg; here the DX350LC-5 sits in the middle of that range with 36,584 kg. 374 Doosan models across 26 series are on record.

Doosan DX — the number is the tonnage class, LC means the extended track

The "Doosan Hydraulic Excavator" bucket lists 29 models of the DX line, spanning 70 to 278 kW and 13.9 to nearly 53 tonnes of operating weight — from a mid-size tracked excavator to a large jobsite machine. The sample models DX140LC, DX225LC, DX300LC, DX350LC and DX420LC show the consistent naming pattern.

Read on 4 more paragraphs

At Doosan, the DX prefix is followed directly by a number that roughly reflects the machine's operating weight in tonnes — a DX225LC sits in the 22-to-23-tonne class. The LC suffix denotes an extended and widened crawler undercarriage, giving more footprint and thus stability during lifting work as well as better flotation on soft ground; models without the suffix run on the narrower standard gauge.

In practice that means two Doosan excavators with a similar number, one with LC and one without, differ mainly in undercarriage width rather than in displacement or engine power.

For a used excavator in this class, check the track rollers, chain tension and the bucket and arm bushings — the most common wear points under continuous jobsite use. A test run at full hydraulic load also shows whether the pump and valves still deliver full cylinder force.

In short: on the DX line, the number reveals the rough tonnage class and the LC suffix the undercarriage width, without needing to consult a spec sheet.

Sources: SpecCodex register, model data: Doosan Hydraulic Excavator, — Bedeutung der Buchstaben bei Baggermodellen (cm-sv.com), — Doosan DX225LC Hydraulic Excavator (RitchieSpecs)

Technical data

Engine

Engine makeScaniacorrect
Engine modelDC09correct
Power322.4 hp (233.4 kW)correct
Rated speed1,800 rpmcorrect
Torque1,324.1 Nmcorrect
Speed at max. torque1,300 rpmcorrect
Cylinders5correct
Displacement9,301.3 cm³correct
Coolant capacity52.2 lcorrect
Engine oil capacity36.3 lcorrect

Dimensions and weights

Unladen weight36,584 kgcorrect

Working data

Hydraulic oil capacity450.1 lcorrect
Fuel tank capacity600.4 lcorrect

Other data

Cab height3,078.5 mmcorrect

More machines with this engine (Scania DC09, 6)

Where this model stands

Power-to-weight ratio: 6.4 kW/t (233 kW / 36.6 t)

Stronger than 86% of the excavators & compaction in the register — out of 1,650 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Doosan DX350LC-5 have?

The Doosan DX350LC-5 delivers 322 hp.

How much does the Doosan DX350LC-5 weigh?

The unladen weight is 36,584 kg.

What engine does the Doosan DX350LC-5 have?

5 cylinders, 9,301 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare