Technical register for agricultural, construction and commercial machinery · sourced data
StartExcavators & compactionDoosan › DX140LC

Doosan DX140LC

Series: Doosan Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Doosan DX140LC is a model in the Doosan Hydraulic Excavator series. The engine delivers 70.8 kW, has 6 cylinders, with a displacement of 5,883 cm³. Torque is 436 Nm. Rated speed is 1,850 rpm. The unladen weight is 13,999.7 kg. Ground clearance is 411.5 mm. The tank holds 267.3 litres. Maximum torque is reached at 1,400 rpm. The pump delivers 228.3 l/min. The hydraulic tank holds 148 litres. Working pressure is 324 bar. The cooling system holds 20.1 litres. The oil fill is 25.4 litres. The electrical system runs on 24 V. The engine fitted is the DL06. The Doosan Hydraulic Excavator series covers 29 models. Rated output within it ranges from 70.8 to 278.1 kW; the DX140LC sits at the bottom of that range with 70.8 kW. Its immediate neighbours are the DX140LC-5 above it with 84.3 kW. 314 Doosan models across 20 series are on record. The model is listed under Excavators & compaction. 18 verified figures from 1 source are on file.

Doosan DX — the number is the tonnage class, LC means the extended track

The "Doosan Hydraulic Excavator" bucket lists 29 models of the DX line, spanning 70 to 278 kW and 13.9 to nearly 53 tonnes of operating weight — from a mid-size tracked excavator to a large jobsite machine. The sample models DX140LC, DX225LC, DX300LC, DX350LC and DX420LC show the consistent naming pattern.

Read on 4 more paragraphs

At Doosan, the DX prefix is followed directly by a number that roughly reflects the machine's operating weight in tonnes — a DX225LC sits in the 22-to-23-tonne class. The LC suffix denotes an extended and widened crawler undercarriage, giving more footprint and thus stability during lifting work as well as better flotation on soft ground; models without the suffix run on the narrower standard gauge.

In practice that means two Doosan excavators with a similar number, one with LC and one without, differ mainly in undercarriage width rather than in displacement or engine power.

For a used excavator in this class, check the track rollers, chain tension and the bucket and arm bushings — the most common wear points under continuous jobsite use. A test run at full hydraulic load also shows whether the pump and valves still deliver full cylinder force.

In short: on the DX line, the number reveals the rough tonnage class and the LC suffix the undercarriage width, without needing to consult a spec sheet.

Sources: Kennwerte der Modelle Doosan Hydraulic Excavator, — Bedeutung der Buchstaben bei Baggermodellen (cm-sv.com), — Doosan DX225LC Hydraulic Excavator (RitchieSpecs)

Technical data

Engine

Engine modelDL06correct
Power70.8 kWcorrect
Rated speed1,850 rpmcorrect
Torque436correct
Speed at max. torque1,400 rpmcorrect
Cylinders6correct
Displacement5,883 cm³correct
Aspirationturbocharged with air to air intercoolercorrect
Coolant capacity20.1 lcorrect
Engine oil capacity25.4 lcorrect

Dimensions and weights

Ground clearance411.5correct
Unladen weight13,999.7 kgcorrect

Working data

Pump flow228.3 l/mincorrect
Hydraulic oil capacity148 lcorrect
Hydraulic pressure324 barcorrect
Fuel tank capacity267.3 lcorrect

Other data

Cab height2,773.7correct
System voltage24 Vcorrect

More machines with this engine (Doosan DL06, 21)

Where this model stands

Power-to-weight ratio: 5.1 kW/t (71 kW / 14 t)

Stronger than 26% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Doosan DX140LC have?

The Doosan DX140LC delivers 70.8 kW.

How much does the Doosan DX140LC weigh?

The unladen weight is 14,000 kg.

What engine does the Doosan DX140LC have?

6 cylinders, 5,883 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare