Technical register for agricultural, construction and commercial machinery · sourced data
Start › Excavators & compaction › Doosan › DX225LC-5

Doosan DX225LC-5

Series: Doosan Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Doosan Hydraulic Excavator series from Doosan includes the DX225LC-5. The engine delivers 168.3 hp (120.8 kW), has 6 cylinders, with a displacement of 5,901 cm³. The engine comes from Doosan. Torque is 755.1 Nm. Rated speed is 1,800 rpm. The unladen weight is 23,625.8 kg. The tank holds 400.1 litres. Maximum torque is reached at 1,400 rpm. The hydraulic tank holds 230.2 litres. The cooling system holds 38.2 litres. The oil fill is 26.9 litres. The engine fitted is the DL06P. The Doosan Hydraulic Excavator series covers 30 models. Rated output within it ranges from 100.4 to 385.3 hp; the DX225LC-5 sits in the lower part of that range with 168.3 hp. Its immediate neighbours are the DX225LC below it with 157.1 hp and the DX255LC above it with 175.4 hp. Unladen weight within it ranges from 13,900 to 52,878 kg; here the DX225LC-5 sits in the lower part of that range with 23,625.8 kg. 374 Doosan models across 26 series are on record.

Doosan DX — the number is the tonnage class, LC means the extended track

The "Doosan Hydraulic Excavator" bucket lists 29 models of the DX line, spanning 70 to 278 kW and 13.9 to nearly 53 tonnes of operating weight — from a mid-size tracked excavator to a large jobsite machine. The sample models DX140LC, DX225LC, DX300LC, DX350LC and DX420LC show the consistent naming pattern.

Read on 4 more paragraphs

At Doosan, the DX prefix is followed directly by a number that roughly reflects the machine's operating weight in tonnes — a DX225LC sits in the 22-to-23-tonne class. The LC suffix denotes an extended and widened crawler undercarriage, giving more footprint and thus stability during lifting work as well as better flotation on soft ground; models without the suffix run on the narrower standard gauge.

In practice that means two Doosan excavators with a similar number, one with LC and one without, differ mainly in undercarriage width rather than in displacement or engine power.

For a used excavator in this class, check the track rollers, chain tension and the bucket and arm bushings — the most common wear points under continuous jobsite use. A test run at full hydraulic load also shows whether the pump and valves still deliver full cylinder force.

In short: on the DX line, the number reveals the rough tonnage class and the LC suffix the undercarriage width, without needing to consult a spec sheet.

Sources: SpecCodex register, model data: Doosan Hydraulic Excavator, — Bedeutung der Buchstaben bei Baggermodellen (cm-sv.com), — Doosan DX225LC Hydraulic Excavator (RitchieSpecs)

Technical data

Engine

Engine makeDoosancorrect
Engine modelDL06Pcorrect
Power168.3 hp (120.8 kW)correct
Rated speed1,800 rpmcorrect
Torque755.1 Nmcorrect
Speed at max. torque1,400 rpmcorrect
Cylinders6correct
Displacement5,901 cm³correct
Coolant capacity38.2 lcorrect
Engine oil capacity26.9 lcorrect

Dimensions and weights

Unladen weight23,625.8 kgcorrect

Working data

Hydraulic oil capacity230.2 lcorrect
Fuel tank capacity400.1 lcorrect

Other data

Cab height2,926.1 mmcorrect

More machines with this engine (Doosan DL06P, 3)

Where this model stands

Power-to-weight ratio: 5.1 kW/t (121 kW / 23.6 t)

Stronger than 58% of the excavators & compaction in the register — out of 1,650 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Doosan DX225LC-5 have?

The Doosan DX225LC-5 delivers 168 hp.

How much does the Doosan DX225LC-5 weigh?

The unladen weight is 23,626 kg.

What engine does the Doosan DX225LC-5 have?

6 cylinders, 5,901 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare