Technical register for agricultural, construction and commercial machinery · sourced data
Start › Excavators & compaction › Doosan › DX180LC-5

Doosan DX180LC-5

Series: Doosan Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Doosan DX180LC-5 belongs to the Doosan Hydraulic Excavator series. The engine delivers 132.8 hp (96.2 kW), has 4 cylinders, with a displacement of 4,401.6 cm³. The engine comes from Perkins. Torque is 1,764.1 Nm. Rated speed is 2,000 rpm. The unladen weight is 19,606 kg. The tank holds 291.9 litres. Maximum torque is reached at 1,400 rpm. The hydraulic tank holds 210.1 litres. The cooling system holds 25 litres. The oil fill is 7.9 litres. The engine fitted is the 1204F. The Doosan Hydraulic Excavator series covers 30 models. Rated output within it ranges from 100.4 to 385.3 hp; the DX180LC-5 sits at the bottom of that range with 132.8 hp. Its immediate neighbours are the DX180LC below it with 123.7 hp and the DX225LC above it with 157.1 hp. Unladen weight within it ranges from 13,900 to 52,878 kg; here the DX180LC-5 sits at the bottom of that range with 19,606 kg. 374 Doosan models across 26 series are on record.

Doosan DX — the number is the tonnage class, LC means the extended track

The "Doosan Hydraulic Excavator" bucket lists 29 models of the DX line, spanning 70 to 278 kW and 13.9 to nearly 53 tonnes of operating weight — from a mid-size tracked excavator to a large jobsite machine. The sample models DX140LC, DX225LC, DX300LC, DX350LC and DX420LC show the consistent naming pattern.

Read on 4 more paragraphs

At Doosan, the DX prefix is followed directly by a number that roughly reflects the machine's operating weight in tonnes — a DX225LC sits in the 22-to-23-tonne class. The LC suffix denotes an extended and widened crawler undercarriage, giving more footprint and thus stability during lifting work as well as better flotation on soft ground; models without the suffix run on the narrower standard gauge.

In practice that means two Doosan excavators with a similar number, one with LC and one without, differ mainly in undercarriage width rather than in displacement or engine power.

For a used excavator in this class, check the track rollers, chain tension and the bucket and arm bushings — the most common wear points under continuous jobsite use. A test run at full hydraulic load also shows whether the pump and valves still deliver full cylinder force.

In short: on the DX line, the number reveals the rough tonnage class and the LC suffix the undercarriage width, without needing to consult a spec sheet.

Sources: SpecCodex register, model data: Doosan Hydraulic Excavator, — Bedeutung der Buchstaben bei Baggermodellen (cm-sv.com), — Doosan DX225LC Hydraulic Excavator (RitchieSpecs)

Technical data

Engine

Engine makePerkinscorrect
Engine model1204Fcorrect
Power132.8 hp (96.2 kW)correct
Rated speed2,000 rpmcorrect
Torque1,764.1 Nmcorrect
Speed at max. torque1,400 rpmcorrect
Cylinders4correct
Displacement4,401.6 cm³correct
Coolant capacity25 lcorrect
Engine oil capacity7.9 lcorrect

Dimensions and weights

Unladen weight19,606 kgcorrect

Working data

Hydraulic oil capacity210.1 lcorrect
Fuel tank capacity291.9 lcorrect

Other data

Cab height2,926.1 mmcorrect

More machines with this engine (Perkins 1204F, 4)

Where this model stands

Power-to-weight ratio: 4.9 kW/t (96 kW / 19.6 t)

Stronger than 40% of the excavators & compaction in the register — out of 1,650 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Doosan DX180LC-5 have?

The Doosan DX180LC-5 delivers 133 hp.

How much does the Doosan DX180LC-5 weigh?

The unladen weight is 19,606 kg.

What engine does the Doosan DX180LC-5 have?

4 cylinders, 4,402 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare