Technical register for agricultural, construction and commercial machinery · sourced data

Doosan DX225LC-3 – specifications

Series: Doosan Hydraulic Excavator

Build year not documented · Data origin: Directory data · sources

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Doosan DX225LC-3 is an excavator from the Doosan Hydraulic Excavator series. The six-cylinder engine produces 124.5 kW.

In service, it weighs 21,900 kg.

Within the range, rated power spans from 70.8 to 278 kW; with 124 kW, the DX225LC-3 sits in the mid-field. Directly alongside are the DX255LC with 124 kW below and the DX235LCR-5 with 135 kW above.

Doosan DX — the number is the tonnage class, LC means the extended track

The "Doosan Hydraulic Excavator" bucket lists 29 models of the DX line, spanning 70 to 278 kW and 13.9 to nearly 53 tonnes of operating weight — from a mid-size tracked excavator to a large jobsite machine. The sample models DX140LC, DX225LC, DX300LC, DX350LC and DX420LC show the consistent naming pattern.

Read on 4 more paragraphs

At Doosan, the DX prefix is followed directly by a number that roughly reflects the machine's operating weight in tonnes — a DX225LC sits in the 22-to-23-tonne class. The LC suffix denotes an extended and widened crawler undercarriage, giving more footprint and thus stability during lifting work as well as better flotation on soft ground; models without the suffix run on the narrower standard gauge.

In practice that means two Doosan excavators with a similar number, one with LC and one without, differ mainly in undercarriage width rather than in displacement or engine power.

For a used excavator in this class, check the track rollers, chain tension and the bucket and arm bushings — the most common wear points under continuous jobsite use. A test run at full hydraulic load also shows whether the pump and valves still deliver full cylinder force.

In short: on the DX line, the number reveals the rough tonnage class and the LC suffix the undercarriage width, without needing to consult a spec sheet.

Sources: SpecCodex register, model data: Doosan Hydraulic Excavator, — Bedeutung der Buchstaben bei Baggermodellen (cm-sv.com), — Doosan DX225LC Hydraulic Excavator (RitchieSpecs)

Technical data

Engine

Engine modelDL06Kcorrect
Power124.5 kWcorrect
Cylinders6correct

Dimensions and weights

Unladen weight21,900 kgcorrect

Used listings – figures from public listings

Between June and November 2026, speccodex recorded 7 public used-machine listings for Doosan DX225LC-3 on 3 platforms. Asking prices ranged from €39,000 to €49,500 (median €42,500), years of manufacture between 2005 and 2017.

Operating hours stated in the listings (median) by machine age: 8–12 years: 8,318 h (5 listings).

Offered mainly in the Netherlands (67%), Lithuania (17%) and Denmark (17%); shares refer to listings that state a location.

Asking prices are sellers' demands, not achieved sale prices. Basis: public listings, recorded and analysed by speccodex. As of: 22 Nov 2026. Sellers usually do not state whether prices are net or gross.

How much does a used Doosan DX225LC-3 cost? Asking prices from public listings

Where this model stands

Power-to-weight ratio: 5.7 kW/t (124 kW / 21.9 t)

Stronger than 60% of the excavators & compaction in the register — out of 1,650 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Doosan DX225LC-3 have?

The Doosan DX225LC-3 delivers 124 kW.

How much does the Doosan DX225LC-3 weigh?

The unladen weight is 21,900 kg.

What engine does the Doosan DX225LC-3 have?

6 cylinders.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​‍‌⁠⁠⁠​​⁠​‌‍⁠‍⁠​​⁠‌​

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare