Technical register for agricultural, construction and commercial machinery · sourced data
StartExcavators & compactionDoosan › DX350LC

Doosan DX350LC

Series: Doosan Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Doosan DX350LC belongs to the Doosan Hydraulic Excavator series. The engine delivers 202.1 kW, has 6 cylinders, with a displacement of 7,639.6 cm³. Torque is 1,128 Nm. Rated speed is 1,900 rpm. The unladen weight is 35,200 kg. Ground clearance is 512.1 mm. The tank holds 550 litres. Maximum torque is reached at 1,300 rpm. The pump delivers 578 l/min. The hydraulic tank holds 460.3 litres. Working pressure is 343 bar. The cooling system holds 34.1 litres. The oil fill is 36.3 litres. The electrical system runs on 24 V. The engine fitted is the DL08. The Doosan Hydraulic Excavator series covers 29 models. Rated output within it ranges from 70.8 to 278.1 kW; the DX350LC sits in the upper part of that range with 202.1 kW. Its immediate neighbours are the DX300LC-5 below it with 198.4 kW and the DX420LC above it with 218.5 kW. 314 Doosan models across 20 series are on record. The model is listed under Excavators & compaction. 18 verified figures from 1 source are on file.

Doosan DX — the number is the tonnage class, LC means the extended track

The "Doosan Hydraulic Excavator" bucket lists 29 models of the DX line, spanning 70 to 278 kW and 13.9 to nearly 53 tonnes of operating weight — from a mid-size tracked excavator to a large jobsite machine. The sample models DX140LC, DX225LC, DX300LC, DX350LC and DX420LC show the consistent naming pattern.

Read on 4 more paragraphs

At Doosan, the DX prefix is followed directly by a number that roughly reflects the machine's operating weight in tonnes — a DX225LC sits in the 22-to-23-tonne class. The LC suffix denotes an extended and widened crawler undercarriage, giving more footprint and thus stability during lifting work as well as better flotation on soft ground; models without the suffix run on the narrower standard gauge.

In practice that means two Doosan excavators with a similar number, one with LC and one without, differ mainly in undercarriage width rather than in displacement or engine power.

For a used excavator in this class, check the track rollers, chain tension and the bucket and arm bushings — the most common wear points under continuous jobsite use. A test run at full hydraulic load also shows whether the pump and valves still deliver full cylinder force.

In short: on the DX line, the number reveals the rough tonnage class and the LC suffix the undercarriage width, without needing to consult a spec sheet.

Sources: Kennwerte der Modelle Doosan Hydraulic Excavator, — Bedeutung der Buchstaben bei Baggermodellen (cm-sv.com), — Doosan DX225LC Hydraulic Excavator (RitchieSpecs)

Technical data

Engine

Engine modelDL08correct
Power202.1 kWcorrect
Rated speed1,900 rpmcorrect
Torque1,128correct
Speed at max. torque1,300 rpmcorrect
Cylinders6correct
Displacement7,639.6 cm³correct
AspirationTurbocharger with Intercoolercorrect
Coolant capacity34.1 lcorrect
Engine oil capacity36.3 lcorrect

Dimensions and weights

Ground clearance512.1correct
Unladen weight35,200 kgcorrect

Working data

Pump flow578 l/mincorrect
Hydraulic oil capacity460.3 lcorrect
Hydraulic pressure343 barcorrect
Fuel tank capacity550 lcorrect

Other data

Cab height3,127.2correct
System voltage24 Vcorrect

More machines with this engine (DL08, 7)

Where this model stands

Power-to-weight ratio: 5.7 kW/t (202 kW / 35.2 t)

Stronger than 82% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Doosan DX350LC have?

The Doosan DX350LC delivers 202 kW.

How much does the Doosan DX350LC weigh?

The unladen weight is 35,200 kg.

What engine does the Doosan DX350LC have?

6 cylinders, 7,640 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare