Technical register for agricultural, construction and commercial machinery · sourced data
Start › Excavators & compaction › Doosan › DX420LC

Doosan DX420LC

Series: Doosan Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Doosan Hydraulic Excavator series from Doosan includes the DX420LC. The engine delivers 218.5 kW, has 6 cylinders, with a displacement of 10,962.9 cm³. Torque is 1,373 Nm. Rated speed is 1,800 rpm. The unladen weight is 40,900.4 kg. Ground clearance is 542.5 mm. The tank holds 550 litres. Maximum torque is reached at 1,300 rpm. The pump delivers 630.3 l/min. The hydraulic tank holds 420.2 litres. Working pressure is 314 bar. The cooling system holds 40.1 litres. The oil fill is 44.3 litres. The electrical system runs on 24 V. The engine fitted is the DV11. The Doosan Hydraulic Excavator series covers 30 models. Rated output within it ranges from 70.8 to 278.1 kW; the DX420LC sits in the upper part of that range with 218.5 kW. Its immediate neighbours are the DX350LC below it with 202.1 kW and the S500LCV above it with 232.1 kW. Unladen weight within it ranges from 13,900 to 52,878 kg; here the DX420LC sits in the upper part of that range with 40,900.4 kg. 374 Doosan models across 26 series are on record.

Doosan DX — the number is the tonnage class, LC means the extended track

The "Doosan Hydraulic Excavator" bucket lists 29 models of the DX line, spanning 70 to 278 kW and 13.9 to nearly 53 tonnes of operating weight — from a mid-size tracked excavator to a large jobsite machine. The sample models DX140LC, DX225LC, DX300LC, DX350LC and DX420LC show the consistent naming pattern.

Read on 4 more paragraphs

At Doosan, the DX prefix is followed directly by a number that roughly reflects the machine's operating weight in tonnes — a DX225LC sits in the 22-to-23-tonne class. The LC suffix denotes an extended and widened crawler undercarriage, giving more footprint and thus stability during lifting work as well as better flotation on soft ground; models without the suffix run on the narrower standard gauge.

In practice that means two Doosan excavators with a similar number, one with LC and one without, differ mainly in undercarriage width rather than in displacement or engine power.

For a used excavator in this class, check the track rollers, chain tension and the bucket and arm bushings — the most common wear points under continuous jobsite use. A test run at full hydraulic load also shows whether the pump and valves still deliver full cylinder force.

In short: on the DX line, the number reveals the rough tonnage class and the LC suffix the undercarriage width, without needing to consult a spec sheet.

Sources: Kennwerte der Modelle Doosan Hydraulic Excavator, — Bedeutung der Buchstaben bei Baggermodellen (cm-sv.com), — Doosan DX225LC Hydraulic Excavator (RitchieSpecs)

Technical data

Engine

Engine modelDV11correct
Power218.5 kWcorrect
Rated speed1,800 rpmcorrect
Torque1,373correct
Speed at max. torque1,300 rpmcorrect
Cylinders6correct
Displacement10,962.9 cm³correct
Coolant capacity40.1 lcorrect
Engine oil capacity44.3 lcorrect

Dimensions and weights

Ground clearance542.5correct
Unladen weight40,900.4 kgcorrect

Working data

Pump flow630.3 l/mincorrect
Hydraulic oil capacity420.2 lcorrect
Hydraulic pressure314 barcorrect
Fuel tank capacity550 lcorrect

Other data

Cab height3,154.7correct
System voltage24 Vcorrect

More machines with this engine (DV11, 5)

Where this model stands

Power-to-weight ratio: 5.3 kW/t (218 kW / 40.9 t)

Stronger than 84% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Doosan DX420LC have?

The Doosan DX420LC delivers 218 kW.

How much does the Doosan DX420LC weigh?

The unladen weight is 40,900 kg.

What engine does the Doosan DX420LC have?

6 cylinders, 10,963 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare