Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › CLAAS › Xerion 4000 / 4200

CLAAS Xerion 4000 / 4200

Series: Xerion

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Xerion series from CLAAS includes the Xerion 4000 / 4200. The engine delivers 458 hp (337 kW), has 6 cylinders, with a displacement of 10,677 cm³. Rated speed is 1,900 rpm. The machine is 7,163 mm long and 3,791 mm high. The unladen weight is 15,600 kg. The wheelbase measures 3,600 mm. Top speed is 50 km/h. The engine is water-cooled. The fuel is diesel. The Xerion series covers 17 models. Rated output within it ranges from 305 to 516.7 hp; the Xerion 4000 / 4200 sits in the upper part of that range with 458 hp. Its immediate neighbours are the XERION 4000 below it with 421.6 hp and the XERION 4500 above it with 475.9 hp. Unladen weight within it ranges from 10,200 to 16,570 kg; here the Xerion 4000 / 4200 sits in the upper part of that range with 15,600 kg. 856 CLAAS models across 54 series are on record.

CLAAS Xerion – High-Power Tractor With Rotating Cab Since 1997, with Six-Cylinder Engines, 224 to 380 kW and Operating Weight from 10,200 to 16,570 kg

CLAAS launched the Xerion in 1997 as a standalone large-tractor series. Distinctive features include four equal-size wheels, a cab that rotates 180 degrees, and, on the Saddle Trac version, a centrally mounted cab with mounting points at the front, rear and middle of the vehicle. According to the register, engine output ranges from 224 to 380 kW, with models rated in horsepower spanning 305 to 524 hp.

Read on 3 more paragraphs

The six-cylinder engine displaces between 8,801.5 and 12,809 cm³ depending on model, and PTO output of the recorded models ranges from 380 to 472 hp. Recorded operating weight falls between 10,200 and 16,570 kg, wheelbase between 3,300 and 3,600.2 mm, and top speed is around 50 km/h.

Within the CLAAS range, the Xerion sits above the Axion series as a high-power tractor for operations with heavy draft requirements, such as tillage, slurry tanker transport or contracting work. When buying a used Xerion, it matters to distinguish between Standard, Saddle Trac and Trac VC versions.

With rated outputs from 224 to 380 kW, the Xerion exceeds ISO 730 Category III and, in its most powerful models, reaches Category IV for the rear three-point hitch. Both Caterpillar and Mercedes-Benz, whose engines were fitted depending on model year, remain active engine manufacturers and still supply spare parts for their units.

Sources: SpecCodex register, model data: CLAAS Xerion, CLAAS

Technical data

Engine

Fueldieselcorrect
Power458 hp (337 kW)correct
Rated speed1,900 rpmcorrect
Cylinders6correct
Displacement10,677 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length7,163 mmcorrect
Height3,791 mmcorrect
Wheelbase3,600 mmcorrect
Unladen weight15,600 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearboxstufenloses Getriebecorrect
Top speed50 km/hcorrect

Where this model stands

Power-to-weight ratio: 21.6 kW/t (337 kW / 15.6 t)

Power class: Heavy (> 180 hp)

Stronger than 99% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the CLAAS Xerion 4000 / 4200 have?

The CLAAS Xerion 4000 / 4200 delivers 458 hp.

How much does the CLAAS Xerion 4000 / 4200 weigh?

The unladen weight is 15,600 kg.

What engine does the CLAAS Xerion 4000 / 4200 have?

6 cylinders, 10,677 cm³ displacement, Diesel.

How fast does the CLAAS Xerion 4000 / 4200 go?

Top speed is 50 km/h.

What are the dimensions of the CLAAS Xerion 4000 / 4200?

7,163 mm × 3,791 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare