CLAAS Xerion 3300
Built: 2004–2013 · Series: Xerion
More machines from model year 2004
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
CLAAS Xerion – High-Power Tractor With Rotating Cab Since 1997, with Six-Cylinder Engines, 224 to 380 kW and Operating Weight from 10,200 to 16,570 kg
CLAAS launched the Xerion in 1997 as a standalone large-tractor series. Distinctive features include four equal-size wheels, a cab that rotates 180 degrees, and, on the Saddle Trac version, a centrally mounted cab with mounting points at the front, rear and middle of the vehicle. According to the register, engine output ranges from 224 to 380 kW, with models rated in horsepower spanning 305 to 524 hp.
Read on 3 more paragraphs
The six-cylinder engine displaces between 8,801.5 and 12,809 cm³ depending on model, and PTO output of the recorded models ranges from 380 to 472 hp. Recorded operating weight falls between 10,200 and 16,570 kg, wheelbase between 3,300 and 3,600.2 mm, and top speed is around 50 km/h.
Within the CLAAS range, the Xerion sits above the Axion series as a high-power tractor for operations with heavy draft requirements, such as tillage, slurry tanker transport or contracting work. When buying a used Xerion, it matters to distinguish between Standard, Saddle Trac and Trac VC versions.
With rated outputs from 224 to 380 kW, the Xerion exceeds ISO 730 Category III and, in its most powerful models, reaches Category IV for the rear three-point hitch. Both Caterpillar and Mercedes-Benz, whose engines were fitted depending on model year, remain active engine manufacturers and still supply spare parts for their units.
Sources: SpecCodex register, model data: CLAAS Xerion, CLAAS
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 305 hp (224 kW)correct |
| Rated speed | 2,100 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 8,804 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 6,630 mmcorrect |
|---|---|
| Width | 2,490 mm (minimum)correct |
| Height | 3,720 mmcorrect |
| Wheelbase | 3,300 mmcorrect |
| Ground clearance | 470 mmcorrect |
| Unladen weight | 10,200 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | stufenloses Getriebecorrect |
| Top speed | 50 km/hcorrect |
Origin and approval
| Construction | full-frame constructioncorrect |
|---|
Where this model stands
Power-to-weight ratio: 22 kW/t (224 kW / 10.2 t)
Power class: Heavy (> 180 hp)
Stronger than 97% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the CLAAS Xerion 3300 have?
The CLAAS Xerion 3300 delivers 305 hp.
How much does the CLAAS Xerion 3300 weigh?
The unladen weight is 10,200 kg.
What engine does the CLAAS Xerion 3300 have?
6 cylinders, 8,804 cm³ displacement, Diesel.
How fast does the CLAAS Xerion 3300 go?
Top speed is 50 km/h.
What are the dimensions of the CLAAS Xerion 3300?
6,630 mm × 2,490 mm × 3,720 mm.
When was the CLAAS Xerion 3300 built?
Production years: 2004–2013.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
XERION 3800 TRAC VC
XERION 3800TRAC
XERION 4000
XERION 4500
XERION 5000
XERION 5000 TRAC
Xerion
Xerion 3300 Saddle Trac
Xerion 3300 TRAC
Xerion 3300 Trac VC
Xerion 3800
Xerion 3800 Saddle Trac
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.