Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › CLAAS › Celtis › Celtis 456 RX

CLAAS Celtis 456 RX

Series: Celtis

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Celtis 456 RX from CLAAS is part of the Celtis series. The engine delivers 102 hp (76 kW). The engine comes from John Deere. The engine is water-cooled. The model was built in France. The fuel is diesel. Its predecessor was the Renault Celtis 456 RX. The Celtis series covers 18 models. Rated output within it ranges from 75 to 102 hp; the Celtis 456 RX sits at the top of that range with 102 hp. Its immediate neighbours are the Celtis 446 below it with 92 hp. 856 CLAAS models across 54 series are on record.

CLAAS Celtis – Compact Post-Renault Series, 2003 to 2008, with John Deere Four-Cylinder Engines, 53 to 76 kW/75 to 102 hp and Operating Weight from 3,730 to 4,670 kg

The Celtis was a compact tractor series that CLAAS continued building at the Le Mans plant after acquiring Renault Agriculture in 2003; the models recorded in the register date from model years 2003 to 2008. Engine output ranges from 53 to 76 kW, with models rated in horsepower spanning 75 to 102 hp, using four-cylinder engines with an almost uniform displacement of 4,525 to 4,526.1 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 3,730 to 4,670 kg, wheelbase of the recorded models is 2,489 mm, and top speed spans 40 to 40.1 km/h. Within the Celtis family, versions with the RA and RX suffixes were offered, differing in chassis or equipment.

Within the CLAAS range, the Celtis sat below the Ares as a compact tractor for smaller and medium farms and grassland work. Buyers of a used Celtis should check the exact variant, as tyre size, ground clearance and equipment can differ.

With rated outputs from 53 to 76 kW, the Celtis falls within ISO 730 Category II for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute. The four-cylinder diesel engines come from John Deere, a manufacturer that remains active today and still supplies spare parts for these model years, including injection and turbocharger components for the cooling and fuel systems.

Sources: SpecCodex register, model data: CLAAS Celtis, CLAAS

Technical data

Engine

Engine makeJohn Deerecorrect
Fueldieselcorrect
Power102 hp (76 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect

Origin and approval

PlantFrancecorrect

Other data

PredecessorRenault Celtis 456 RXcorrect

Frequently asked questions

How much power does the CLAAS Celtis 456 RX have?

The CLAAS Celtis 456 RX delivers 102 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare