Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › CLAAS › Celtis › Celtis 426

CLAAS Celtis 426 (55 kW)

Built: 2003–2008 · Series: Celtis

More machines from model year 2003

Source: claas.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CLAAS Celtis 426 belongs to the Celtis series. Production: 2003–2008. The engine delivers 75 hp (55 kW), has 4 cylinders, with a displacement of 4,525 cm³. The engine comes from John Deere. Rated speed is 2,000 rpm. The machine is 3,805 mm long, 2,510 mm wide and 2,604 mm high. The unladen weight is 3,730 kg. The wheelbase measures 2,489 mm. Ground clearance is 380 mm. Top speed is 40 km/h. The engine is water-cooled. Tyres: front 11.2 R 24, rear 16.9 R 30. The model was built in France. The fuel is diesel. The Celtis series covers 18 models. Rated output within it ranges from 74.1 to 102 hp; the Celtis 426 sits at the bottom of that range with 75 hp. Its immediate neighbours are the Celtis 426 below it with 74.1 hp and the Celtis 436 above it with 82.3 hp. Unladen weight within it ranges from 3,730 to 4,670 kg; here the Celtis 426 sits at the bottom of that range with 3,730 kg. 856 CLAAS models across 54 series are on record.

CLAAS Celtis – Compact Post-Renault Series, 2003 to 2008, with John Deere Four-Cylinder Engines, 53 to 76 kW/75 to 102 hp and Operating Weight from 3,730 to 4,670 kg

The Celtis was a compact tractor series that CLAAS continued building at the Le Mans plant after acquiring Renault Agriculture in 2003; the models recorded in the register date from model years 2003 to 2008. Engine output ranges from 53 to 76 kW, with models rated in horsepower spanning 75 to 102 hp, using four-cylinder engines with an almost uniform displacement of 4,525 to 4,526.1 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 3,730 to 4,670 kg, wheelbase of the recorded models is 2,489 mm, and top speed spans 40 to 40.1 km/h. Within the Celtis family, versions with the RA and RX suffixes were offered, differing in chassis or equipment.

Within the CLAAS range, the Celtis sat below the Ares as a compact tractor for smaller and medium farms and grassland work. Buyers of a used Celtis should check the exact variant, as tyre size, ground clearance and equipment can differ.

With rated outputs from 53 to 76 kW, the Celtis falls within ISO 730 Category II for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute. The four-cylinder diesel engines come from John Deere, a manufacturer that remains active today and still supplies spare parts for these model years, including injection and turbocharger components for the cooling and fuel systems.

Sources: SpecCodex register, model data: CLAAS Celtis, CLAAS

Technical data

Engine

Engine makeJohn Deerecorrect
Fueldieselcorrect
Power75 hp (55 kW)correct
Rated speed2,000 rpmcorrect
Cylinders4correct
Displacement4,525 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,805 mmcorrect
Width2,510 mmcorrect
Height2,604 mmcorrect
Wheelbase2,489 mmcorrect
Ground clearance380 mmcorrect
Unladen weight3,730 kgcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect
Front tyres11.2 R 24correct
Rear tyres16.9 R 30correct
Top speed40 km/hcorrect

Origin and approval

PlantFrancecorrect

Where this model stands

Power-to-weight ratio: 14.7 kW/t (55 kW / 3.7 t)

Power class: Universal (40–100 hp)

Stronger than 51% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the CLAAS Celtis 426 have?

The CLAAS Celtis 426 delivers 75 hp.

How much does the CLAAS Celtis 426 weigh?

The unladen weight is 3,730 kg.

What engine does the CLAAS Celtis 426 have?

4 cylinders, 4,525 cm³ displacement, Diesel.

How fast does the CLAAS Celtis 426 go?

Top speed is 40 km/h.

What are the dimensions of the CLAAS Celtis 426?

3,805 mm × 2,510 mm × 2,604 mm.

When was the CLAAS Celtis 426 built?

Production years: 2003–2008.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Tractor & Construction Plant Wiki (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare