StartTractorsCLAAS › Celtis 456

CLAAS Celtis 456 4WD

Series: Celtis

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the CLAAS Celtis 456 belongs to the Claas 4WD Tractor series. 102 hp (74 kW) is what the four-cylinder engine gets out of 4.5 litres. Rated power is reached at 2,200 rpm.

At 40 km/h, that is as fast as it goes. Empty, it weighs 4,670 kg.

Within the range, rated power spans from 74.1 to 517 hp; with 102 hp, the Celtis 456 sits in the lower third. Directly alongside are the Ares 547 with 96 hp below and the Ares 557 with 104 hp above.

Technical data

Engine

Engine modelECE-R24correct
Power102 hp (74 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement4,526.1 cm³correct

Dimensions and weights

Ground clearance504.2correct
Unladen weight4,670 kgcorrect

Drivetrain and chassis

Gearbox typeCLAAScorrect
Forward gears20correct
Reverse gears20correct
Tyre sizeFront 13.6R28, Rear 16.9 R 38correct
Top speed40.1 km/hcorrect
System voltage12 Vcorrect

Working data

Pump flow60.2 l/mincorrect
Hydraulic pressure180correct
Fuel tank capacity145.4 lcorrect

Other data

Height2,706.6correct

Where this model stands

Power-to-weight ratio: 15.8 kW/t (74 kW / 4.7 t)

Power class: Large (100–180 hp)

Stronger than 67% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the CLAAS Celtis 456 have?

The CLAAS Celtis 456 delivers 102 hp.

How much does the CLAAS Celtis 456 weigh?

The unladen weight is 4,670 kg.

What engine does the CLAAS Celtis 456 have?

4 cylinders, 4,526 cm³ displacement.

How fast does the CLAAS Celtis 456 go?

Top speed is 40.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare