Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › CLAAS › Celtis 436

CLAAS Celtis 436 (62 kW)

Built: 2003–2008 · Series: Celtis

More machines from model year 2003

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CLAAS Celtis 436 is a model in the Celtis series. Production: 2003–2008. The engine delivers 84 hp (62 kW), has 4 cylinders, with a displacement of 4,525 cm³. Rated speed is 2,000 rpm. The machine is 3,872 mm long, 2,510 mm wide and 2,654 mm high. The unladen weight is 3,760 kg. The wheelbase measures 2,489 mm. Ground clearance is 420 mm. Top speed is 40 km/h. The engine is water-cooled. Tyres: front 13.6 R 24, rear 16.9 R 34. The fuel is diesel. The Celtis series covers 18 models. Rated output within it ranges from 74.1 to 102 hp; the Celtis 436 sits in the lower part of that range with 84 hp. Its immediate neighbours are the Celtis 436 below it with 82.3 hp and the Celtis 446 above it with 91.9 hp. Unladen weight within it ranges from 3,730 to 4,670 kg; here the Celtis 436 sits at the bottom of that range with 3,760 kg. 856 CLAAS models across 54 series are on record.

CLAAS Celtis – Compact Post-Renault Series, 2003 to 2008, with John Deere Four-Cylinder Engines, 53 to 76 kW/75 to 102 hp and Operating Weight from 3,730 to 4,670 kg

The Celtis was a compact tractor series that CLAAS continued building at the Le Mans plant after acquiring Renault Agriculture in 2003; the models recorded in the register date from model years 2003 to 2008. Engine output ranges from 53 to 76 kW, with models rated in horsepower spanning 75 to 102 hp, using four-cylinder engines with an almost uniform displacement of 4,525 to 4,526.1 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 3,730 to 4,670 kg, wheelbase of the recorded models is 2,489 mm, and top speed spans 40 to 40.1 km/h. Within the Celtis family, versions with the RA and RX suffixes were offered, differing in chassis or equipment.

Within the CLAAS range, the Celtis sat below the Ares as a compact tractor for smaller and medium farms and grassland work. Buyers of a used Celtis should check the exact variant, as tyre size, ground clearance and equipment can differ.

With rated outputs from 53 to 76 kW, the Celtis falls within ISO 730 Category II for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute. The four-cylinder diesel engines come from John Deere, a manufacturer that remains active today and still supplies spare parts for these model years, including injection and turbocharger components for the cooling and fuel systems.

Sources: SpecCodex register, model data: CLAAS Celtis, CLAAS

Technical data

Engine

Fueldieselcorrect
Power84 hp (62 kW)correct
Rated speed2,000 rpmcorrect
Cylinders4correct
Displacement4,525 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,872 mmcorrect
Width2,510 mm (maximum)correct
Height2,654 mmcorrect
Wheelbase2,489 mmcorrect
Ground clearance420 mmcorrect
Unladen weight3,760 kgcorrect

Drivetrain and chassis

Front tyres13.6 R 24correct
Rear tyres16.9 R 34correct
Top speed40 km/hcorrect

Where this model stands

Power-to-weight ratio: 16.5 kW/t (62 kW / 3.8 t)

Power class: Universal (40–100 hp)

Stronger than 58% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the CLAAS Celtis 436 have?

The CLAAS Celtis 436 delivers 84 hp.

How much does the CLAAS Celtis 436 weigh?

The unladen weight is 3,760 kg.

What engine does the CLAAS Celtis 436 have?

4 cylinders, 4,525 cm³ displacement, Diesel.

How fast does the CLAAS Celtis 436 go?

Top speed is 40 km/h.

What are the dimensions of the CLAAS Celtis 436?

3,872 mm × 2,510 mm × 2,654 mm.

When was the CLAAS Celtis 436 built?

Production years: 2003–2008.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare