StartTractorsCLAAS › Arion 520

CLAAS Arion 520 (85 kW) 4WD

Series: ARION

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the CLAAS Arion 520 belongs to the Claas 4WD Tractor series. 122 hp (85 kW) is what the four-cylinder engine gets out of 4.5 litres. Rated power is reached at 2,200 rpm.

It reaches up to 50 km/h. Unladen, it tips the scales at 6,274 kg.

Within the range, rated power spans from 74.1 to 517 hp; with 122 hp, the Arion 520 sits in the lower third. Directly alongside are the Arion 510 with 112 hp below and the Arion 610 with 125 hp above.

Technical data

Engine

Engine modelECE R 24correct
Power122.4 hp (85 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement4,526.1 cm³correct

Dimensions and weights

Length4,890 mmcorrect
Ground clearance508correct
Unladen weight6,274 kgcorrect

Drivetrain and chassis

Gearbox typepowershift transmission speeds 6correct
Forward gears24correct
Reverse gears24correct
Tyre sizeFront 14.9 R 28, Rear 18.4R38correct
Top speed50.1 km/hcorrect

Working data

Pump flow60.2 l/mincorrect
Hydraulic pressure200correct
Fuel tank capacity250.2 lcorrect

Other data

Cab height2,984correct

More machines with this engine (ECE R 24, 12)

Where this model stands

Power-to-weight ratio: 13.5 kW/t (85 kW / 6.3 t)

Power class: Large (100–180 hp)

Stronger than 74% of the tractors in the register — out of 15,105 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the CLAAS Arion 520 have?

The CLAAS Arion 520 delivers 122 hp.

How much does the CLAAS Arion 520 weigh?

The unladen weight is 6,274 kg.

What engine does the CLAAS Arion 520 have?

4 cylinders, 4,526 cm³ displacement.

How fast does the CLAAS Arion 520 go?

Top speed is 50.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare