Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › CLAAS › ARION › ARION 630C

CLAAS ARION 630C

Series: ARION

The photo shows the Arion 540 from the same series. Source: https://www.technikboerse.com/gebraucht/lokal/baden-wuerttem

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CLAAS ARION 630C is a tractor made by CLAAS.

CLAAS Arion – Mid-Range Tractor From the Former Renault Plant in Le Mans, with Four- and Six-Cylinder Engines, 77 to 154 kW and Operating Weight from 5,050 to 7,400 kg

The Arion series traces back to Renault Agriculture and has continued under the CLAAS name since CLAAS took over the Le Mans plant in 2003. According to the register, output of the recorded models ranges from 77 to 154 kW, using four- and six-cylinder engines with displacement from 4,485 to 6,789 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 5,050 to 7,400 kg, and top speed of the listed variants spans 40.1 to 50.1 km/h. Besides conventional powershift gearboxes, CLAAS also offers stepless CMATIC transmission within the Arion family, identifiable from the corresponding model designations in the register.

Within the CLAAS line-up, the Arion sits between the smaller Axos and Celtis models and the larger Axion series, aimed at farms with mixed requirements spanning arable work, transport and front-loader tasks. Buyers of a used Arion should pay attention to gearbox variant and cab equipment, as the range expanded considerably across model years.

With rated outputs from 77 to 154 kW, the Arion falls within ISO 730 Category II to III for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute. The John Deere diesel engines come from a manufacturer that remains active today and still supplies spare parts for these model years, including injection components.

Sources: SpecCodex register, model data: CLAAS Arion, CLAAS

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Latvian open data portal (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare