StartTractorsCLAAS › Arion 510

CLAAS Arion 510 4WD

Series: ARION

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CLAAS Arion 510 is a tractor from the Claas 4WD Tractor series. Power comes from a four-cylinder engine; from 4.5 litres it draws 112 hp (77 kW). Rated speed is 2,200 rpm.

At 40 km/h, that is as fast as it goes. At 6,184 kg, it puts weight behind its pulling power — a good 55 kilograms per hp.

Within the range, rated power spans from 74.1 to 517 hp; with 112 hp, the Arion 510 sits in the lower third. Directly alongside are the Ares 557 with 104 hp below and the Arion 520 with 122 hp above.

Technical data

Engine

Engine modelECE R 24correct
Power111.5 hp (77 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement4,526.1 cm³correct

Dimensions and weights

Ground clearance483.1correct
Unladen weight6,184 kgcorrect

Drivetrain and chassis

Gearbox typepowershift transmission speeds 6correct
Forward gears24correct
Reverse gears24correct
Tyre sizeFront 13.6 R 28, Rear 16.9R38correct
Top speed40.1 km/hcorrect

Working data

Pump flow60.2 l/mincorrect
Hydraulic pressure200correct
Fuel tank capacity250.2 lcorrect

Other data

Height2,956.6correct

Where this model stands

Power-to-weight ratio: 12.5 kW/t (77 kW / 6.2 t)

Power class: Large (100–180 hp)

Stronger than 70% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the CLAAS Arion 510 have?

The CLAAS Arion 510 delivers 112 hp.

How much does the CLAAS Arion 510 weigh?

The unladen weight is 6,184 kg.

What engine does the CLAAS Arion 510 have?

4 cylinders, 4,526 cm³ displacement.

How fast does the CLAAS Arion 510 go?

Top speed is 40.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare