StartTractorsAGCO › RT130 Mudder

AGCO RT130 Mudder

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The AGCO RT130 Mudder is a tractor from AGCO. The engine is rated at 97 kW.

The fuel is diesel. Within the range, rated power spans from 16.8 to 216 kW; with 97 kW, the RT130 Mudder sits in the upper third. Directly alongside are the RT120 with 89 kW below and the RT155A with 116 kW above.

Technical data

Engine

Engine makeCumminscorrect
Fueldieselcorrect
Power130 hp (97 kW)correct
Naturally aspiratednaturally aspiratedcorrect

Drivetrain and chassis

Driverear-wheel driveWD/MFWDcorrect

Other data

Main articleAGCOcorrect

Frequently asked questions

How much power does the AGCO RT130 Mudder have?

The AGCO RT130 Mudder delivers 130 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare