AGCO DT240A (178.9 kW)
Built: 2005-2008 · Series: Other models
More machines from model year 2005
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The AGCO DT240A rolled off the line in 2005-2008 as a tractor. The six-cylinder engine produces 178.9 kW.
Power is transmitted through a CVT gearbox.
The fuel is diesel. The predecessor was the AGCO DT240. Within the range, rated power spans from 16.8 to 216 kW; with 179 kW, the DT240A sits at the top. Directly alongside are the DT200a with 175 kW below and the DT250B with 190 kW above.
AGCO – other models: the collective page of tractors outside the named ranges, from the compact GT and LT through the RT mid-range to the larger DT models, 17 to 216 kW, AGCO Sisu, Iseki, Cummins, SDF and SAME engines
This page gathers the tractors listed in the register under the AGCO brand itself that could not be assigned to a named range. AGCO Corporation was formed in 1990 in Duluth, Georgia, and for many years, alongside the later-acquired brands Massey Ferguson, Fendt and Valtra, also sold tractors under its own name. By size the range splits into the compact GT and LT series, the RT mid-range and the larger DT models; a handful of models from other group brands, such as a Fendt 1000 Vario and a Massey Ferguson 6713, also appear in the register. The engines come from several plants and partners within the group: AGCO Sisu – the former Finnish Sisu works, today AGCO Power – in the larger models, Iseki in the compact tractors, plus Cummins, SDF (SAME Deutz-Fahr) and SAME.
Read on 3 more paragraphs
The register lists here 82 versions with 16.8 to 216.3 kW (28.4 to 290 hp) from three- to six-cylinders of 1,124 to 8,400 cm³, PTO outputs from 19 to 240 hp, lift capacities from 400 to 6,913 kg, unladen weights from 620 to 14,000 kg, lengths from 2,480 to 6,157 mm, widths from 1,789 to 2,750 mm and heights from 2,769 to 3,570 mm.
As a group, AGCO is one of the world's three big farm-equipment makers alongside John Deere and CNH Industrial; the own-brand range covers mainly the North American market for compact and mid-range tractors, while the bigger ranges are now sold chiefly under Massey Ferguson, Fendt and Valtra.
On used tractors, engine and hydraulics condition count on the GT and LT compacts, on the RT and DT models operating hours, clutch and four-wheel drive, and – depending on the engine fitted – parts availability through Cummins, SDF or AGCO Power; the variety of engine origins makes the model and engine designation especially important before buying.
Sources: Kennwerte der Modelle AGCO (weitere Modelle), AGCO Corporation (Hersteller)
Technical data
Engine
| Engine make | AGCO Sisucorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 240 hp (178.9 kW)correct |
| Cylinders | 6correct |
| Displacement | 513 cu incorrect |
| Naturally aspirated | naturally aspiratedcorrect |
Dimensions and weights
| Length | 206 in (5232,4 mm)correct |
|---|---|
| Height | 122 in (3098,8 mm)correct |
| Wheelbase | 121 in (3073,4 mm)correct |
| Unladen weight | 19,951 lbs (9049,6 kg)correct |
Drivetrain and chassis
| Drive | rear-wheel driveWD/MFWDcorrect |
|---|---|
| Gearbox | continuously variable transmissioncorrect |
| Gearbox make | PowerMaxxcorrect |
| Forward gears | Infinitecorrect |
| Reverse gears | Infinitecorrect |
Working data
| Lifting capacity | 6,532 kgcorrect |
|---|---|
| Lifting capacity | 14,400 lbs (6531,7 kg)correct |
| Fuel tank capacity | 158.5 galcorrect |
Origin and approval
| Plant | Beauvois, Francecorrect |
|---|
Other data
| Linkage category | Cat IIIcorrect |
|---|---|
| PTO speed | 540/1000correct |
| Predecessor | AGCO DT240correct |
Frequently asked questions
How much power does the AGCO DT240A have?
The AGCO DT240A delivers 240 hp.
What engine does the AGCO DT240A have?
6 cylinders, diesel.
How much does the rear linkage of the AGCO DT240A lift?
The rear linkage lifts 6,532 kg.
When was the AGCO DT240A built?
Production years: 2005-2008.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 26 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.