Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Aebi › TP20

Aebi TP20

Built: 1964–at least 1972 · Series: Transporter

More machines from model year 1964

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Aebi TP20 belongs to the Transporter series. Production: 1964–mind. 1972. The engine delivers 25 hp (18.5 kW), has 2 cylinders, with a displacement of 1,272 cm³. Rated speed is 3,000 rpm. Top speed is 25 km/h. Transmission: 6V + 2R. The engine is air-cooled. The fuel is diesel. The Transporter series covers 10 models. Rated output within it ranges from 24 to 109 hp; the TP20 sits at the bottom of that range with 25 hp. Its immediate neighbours are the TP 25 below it with 24 hp and the TP35 above it with 34 hp. 72 Aebi models across 16 series are on record.

Aebi Transporter TP 20 to TP 88 and VT450 Vario – the Swiss mountain transporter from Burgdorf: the number as hp class, all-wheel drive, tipping bed and forage wagon for slopes, 18 to 80 kW

The transporter is the second Swiss invention of mountain farming alongside the motor mower: a low, all-wheel-drive vehicle with cab at the front and tipping bed at the rear that carries hay, manure, timber and livestock over tracks too steep and too narrow for tractor and truck. Aebi of Burgdorf has built transporters since the 1960s, and the TP range in the register is the programme from the 1970s into the 2000s: the number roughly gives the output in hp – TP 20 and TP 25 the small ones with two-cylinder, TP 35 to TP 65 the mid-range, TP 88 the big four-cylinder – S marks an equipment level, TP420 and TP460 the generation of the 2000s, VT450 Vario the transporter with continuously variable drive from the 2010s. The engines came from suppliers, two- to four-cylinders of 1.3 to 3.8 litres.

Read on 3 more paragraphs

The register lists 10 versions with 18 to 80 kW (24 to 109 hp), 1,272 to 3,769 cm³ with two to four cylinders, rated speeds of 2,600 to 3,000 rpm, unladen weights from 990 to 3,450 kg, widths from 1,440 to 2,500 mm and heights from 2,000 to 2,300 mm – nine diesel, one optionally petrol.

On the slope the transporter replaces tractor and trailer: low centre of gravity, all-wheel drive with locks and the bed directly over the axles allow travel on gradients where a combination would tip; forage-wagon, manure-spreader and slurry-tank bodies make it the universal vehicle of the Alpine farm.

On used transporters, operating hours, engine condition, gearbox and all-wheel drive with locks, brakes (mountain vehicles are braked hard), frame for cracks and the bodies count; parts run through Aebi Schmidt and the engine makers.

Sources: SpecCodex register, model data: Aebi Transporter, Aebi Schmidt (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power25 hp (18.5 kW)correct
Rated speed3,000 rpmcorrect
Cylinders2correct
Displacement1,272 cm³correct
Coolingair-cooledcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox6V + 2Rcorrect
Top speed25 km/hcorrect

Frequently asked questions

How much power does the Aebi TP20 have?

The Aebi TP20 delivers 25 hp.

What engine does the Aebi TP20 have?

2 cylinders, 1,272 cm³ displacement, Diesel.

How fast does the Aebi TP20 go?

Top speed is 25 km/h.

When was the Aebi TP20 built?

Production years: 1964–mind. 1972.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare