Deutz D-05
8 models in this series
Deutz D-05 – Short-Lived Transitional Series, 1963 to 1967, Air-Cooled, 25.6 to 76.1 kW and Operating Weight from 1,775 to 4,600 kg
The D-05 series was a comparatively short-lived transitional generation at Deutz, built only from 1963 to 1967 before the longer-running D-06 series followed. According to the register, output of the recorded models ranges from 25.6 to 76.1 kW, with models rated in horsepower spanning 35 to 104 hp, using three- to six-cylinder engines with displacement from 2,550 to 5,104 cm³.
Read on 3 more paragraphs
Recorded operating weight runs from 1,775 to 4,600 kg, wheelbase from 1,995 to 3,215 mm, and top speed of the listed models spans 18.2 to 27 km/h. The D-05 series also relied on the brand's characteristic air-cooled diesel engines.
Because of its short production run, D-05 models are rarer today than their predecessor and successor series. For a used example, checking parts availability is worthwhile, since many components are now only found through specialist dealers.
The D-05 series' short production run from 1963 to 1967 fell before the international standardisation of the three-point hitch under ISO 730 in 1977, while the power take-off speed of 540 revolutions per minute internationally fixed in 1965 under ISO R 500 was already in effect. Deutz still exists as an engine manufacturer today and continues to supply spare parts for its air-cooled units, which eases repairs on these now comparatively rare tractors.
Sources: SpecCodex register, model data: Deutz D-05
Models compared
8 of 8 models.
| D 4005 Puntil 1967 | D 45051965–1967 | D 50051965–1967 | D 55051965–1967 | D 5505 Tandem1967 | D 60051966–1967 | D 80051965–1967 | D 90051967 | |
|---|---|---|---|---|---|---|---|---|
| Power | 25.6 kW | 29.3 kW | 32.9 kW | 38.1 kW | 76.1 kW | 42.5 kW | 55 kW | 62.2 kW |
| Rated speed | – | 2,300 rpm | 2,300 rpm | 2,300 rpm | – | 2,300 rpm | 2,300 rpm | 2,300 rpm |
| Linkage category | – | Cat I/II | Cat II | Cat II | Cat II | Cat II | Cat II | Cat II |
| Cylinders | 3 | 3 | 4 | 4 | 2 × 4 | 4 | 6 | 6 |
| Displacement | 2,550 cm³ | 2,550 cm³ | 3,400 cm³ | 3,400 cm³ | – | 3,402 cm³ | 5,100 cm³ | 5,104 cm³ |
| Fuel tank capacity | – | 64 l | 65 l | 64 l | – | 80 l | 118 l | – |
| Forward gears | 8 | 6 | – | 8 | 8 | 9 | 8 | – |
| Reverse gears | 2 | 2 | – | 4 | 4 | 3 | 4 | – |
| Top speed | 18.2 km/h | 20 km/h | 20 km/h | 20 km/h | 20 km/h | 20 km/h | 26.5 km/h | 27 km/h |
| Wheelbase | 1,995 mm | 1,995 mm | 2,125 mm | 2,200 mm | 3,215 mm | 2,150 mm | 2,450 mm | 2,550 mm |
| Length | 3,430 mm | 3,415 mm | 3,485 mm | 3,730 mm | 7,520 mm | 3,670 mm | 4,065 mm | 4,165 mm |
| Width | 1,350 mm | 1,610 mm | 1,510 mm | 1,800 mm | 1,800 mm | 1,950 mm | 1,965 mm | 2,160 mm |
| Height | 1,590 mm | 1,640 mm | 1,640 mm | 1,785 mm | 1,785 mm | 1,535 mm | 1,875 mm | 1,875 mm |
| Unladen weight | 1,775 kg | 1,920 kg | 2,065 kg | 2,450 kg | 4,600 kg | 2,605 kg | 3,690 kg | 3,675 kg |
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
D 4005 P
The D-05 series from Deutz includes the D 4005 P. Production: 1963/65?–1967. The engine delivers 35 hp (25.6 kW),...
D 4505
The D-05 series from Deutz includes the D 4505. Production: 1965–1967. The engine delivers 40 hp (29.3 kW), has 3...
D 5005
The D 5005 from Deutz is part of the D-05 series. Production: 1965–1967. The engine delivers 45 hp (32.9 kW), has 4...
D 5505
The D 5505 from Deutz is part of the D-05 series. Production: 1965–1967. The engine delivers 52 hp (38.1 kW), has 4...
D 5505 Tandem
The D-05 series from Deutz includes the D 5505 Tandem. Production: 1967. The engine delivers 104 hp (76.1 kW). The...
D 6005
The Deutz D 6005 is a model in the D-05 series. Production: 1966–1967. The engine delivers 58 hp (42.5 kW), has 4...
D 8005
The D 8005 from Deutz is part of the D-05 series. Production: 1965–1967. The engine delivers 75 hp (55 kW), has 6...
D 9005
The Deutz D 9005 belongs to the D-05 series. Production: 1967. The engine delivers 85 hp (62.2 kW), has 6 cylinders,...