Case IH CX-Baureihe
6 models in this series
Case IH CX series (1998–2002) – the utility tractors from Doncaster and Neuss: CX 50 to CX 100, the number as hp class, DT for four-wheel drive, Perkins and Case three- and four-cylinders of 2.7 to 4.2 litres
The CX range was Case IH's simple utility tractor of the late 1990s – the successor to the 3200 and 4200 ranges, built at first in Doncaster, England, and Neuss on the Rhine, the former IH plants, and after the merger into CNH in 1999 partly in Racine for North America. The type logic: CX marks the range, the number the hp class – CX 50 about 50 hp, CX 70 70 hp, CX 90 90 hp, CX 100 about 100 hp – DT four-wheel drive (the designation from the Italian doppia trazione that CNH took over from Fiat). The engines are three- and four-cylinders from Perkins (1004.4 of 4.0 litres) and from Case IH's own production in Neuss of 2.7 to 4.2 litres at 2,200 to 2,250 rpm, with mechanical injection pump; the transmission is the synchromesh gearbox with shuttle, the cab the plain version without electronics.
Read on 3 more paragraphs
The register lists 6 versions with 36.8 to 75 kW from three- and four-cylinders of 2,700 to 4,232 cm³, torque from 164 to 364 Nm, unladen weights from 3,140 to 4,235 kg, lengths from 3,830 to 4,470 mm, widths from 2,020 to 2,150 mm and heights from 2,470 to 2,745 mm.
The CX was the tractor of grassland and part-time farms, horse yards and municipalities looking for a simple four-cylinder without electronics; in 2002 the JX range from Jesi followed in the same logic.
On used tractors, operating hours, engine condition and injection pump, clutch and shuttle, four-wheel-drive clutch on DT models, hydraulics and cab count; parts run through CNH and Perkins and are inexpensive.
Sources: SpecCodex register, model data: Case IH CX-Baureihe, Case IH (CNH, Hersteller)
Models compared
6 of 6 models.
| CX 1001998–2000 | CX 801998–2000 | CX 901998–2000 | CX-50 (DT)1998–2000 | CX-60 (DT)1998–2000 | CX-70 (DT)1998–2000 | |
|---|---|---|---|---|---|---|
| Power | 75 kW | 61.8 kW | 66.2 kW | 36.8 kW | 44.1 kW | 53.7 kW |
| Rated speed | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,250 rpm | 2,250 rpm | 2,200 rpm |
| PTO speed | 540/1000 rpm | 540/1000 rpm | 540 | – | – | – |
| Linkage category | Cat II | Cat II | Cat I/II | – | – | – |
| Cylinders | 4 | 4 | 4 | 3 | 3 | 4 |
| Displacement | 3,990 cm³ | 3,990 cm³ | 3,990 cm³ | 2,700 cm³ | 2,700 cm³ | 4,232 cm³ |
| Torque | 364 Nm | 305 Nm | 319 Nm | 164 Nm | 218 Nm | 265 Nm |
| Fuel tank capacity | 155 l | 155 l | 155 l | – | – | – |
| Top speed | 30 km/h | 30 km/h | 30 km/h | 30 km/h | 30 km/h | 30 km/h |
| Wheelbase | 2,356 mm | 2,356 mm | 2,356 mm | 2,154 mm | 2,154 mm | 2,263 mm |
| Length | 4,470 mm | 3,980 mm | 3,980 mm | 3,830 mm | 3,860 mm | 3,980 mm |
| Width | 2,110 mm | 2,100 mm | 2,150 mm | 2,020 mm | 2,100 mm | 2,100 mm |
| Height | 2,745 mm | 2,520 mm | 2,520 mm | 2,470 mm | 2,520 mm | 2,520 mm |
| Unladen weight | 4,235 kg | 3,930 kg | 3,705 kg | 3,225 kg | 3,140 kg | 3,185 kg |
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
CX 100
The CX series from Case IH includes the CX 100. Production: 1998–2000. The engine delivers 102 hp (75 kW), has 4...
CX 80
The CX 80 from Case IH is part of the CX series. Production: 1998–2000. The engine delivers 84 hp (61.8 kW), has 4...
CX 90
The CX series from Case IH includes the CX 90. Production: 1998–2000. The engine delivers 90 hp (66.2 kW), has 4...
CX-50 (DT)
The Case IH CX-50 (DT) belongs to the CX series. Production: 1998–2000. The engine delivers 50 hp (36.8 kW), has 3...
CX-60 (DT)
The Case IH CX-60 (DT) is a model in the CX series. Production: 1998–2000. The engine delivers 60 hp (44.1 kW), has...
CX-70 (DT)
With the CX-70 (DT), Case IH offers a model from the CX series. Production: 1998–2000. The engine delivers 73 hp...
