Case IH 9200 er-Baureihe
6 models in this series
Case IH 9200 series (1990–1995) – the second Steiger generation under Case IH from Fargo: 9230 to 9280, the last digits as power step, wheeled and Quadtrac versions, Cummins and Case six-cylinders of 8.3 and 10 litres
The 9200 series was the second articulated-tractor generation Case IH built at the Fargo plant in North Dakota after the takeover of Steiger in 1986 – the successor to the 9100s of 1987 and the range in which the first four-track tractor went into series production in 1996 with the 9370 Quadtrac. The type logic: 92 marks the range, the last two digits the power step – 9230 about 235 hp, 9250 about 275, 9270 about 335, 9280 about 375 hp – the versions comprise wheeled articulated tractors on duals or triples and, in the late range, the Quadtrac. The engines are the Case six-cylinder 6TA-830 of 8.3 litres in the small and the Cummins N14 and Case-Cummins 6TA-1000 of 10 litres in the big models, at 2,100 to 2,200 rpm; the transmission is the 12- or 24-speed powershift, optionally the synchromesh gearbox.
Read on 3 more paragraphs
The register lists 6 versions with 172.8 to 279.5 kW from six-cylinders of 8,268 to 10,016 cm³, torque up to 1,324 Nm, unladen weights from 10,935 to 15,728 kg, lengths from 6,410 to 7,610 mm, widths from 2,661 to 4,005 mm and heights from 3,198 to 3,870 mm.
The 9200s are the tractors with which Case IH held the prairie articulated-tractor market against John Deere and Versatile; in 1996 the 9300 series followed with the Quadtrac in series production, in 2000 the STX.
On used tractors, operating hours, engine (Cummins and Case parts available), powershift (clutch packs, electronics), articulation joint and steering cylinders, axles and tyres, hydraulics count; parts run through CNH and Cummins.
Sources: SpecCodex register, model data: Case IH 9200er-Baureihe, Case IH (CNH, Hersteller, Werk Fargo)
Models compared
6 of 6 models.
| 92301990–1995 | 92401990–1994 | 92501990–1995 | 92601990–1994 | 92701990–1995 | 92801990–1995 | |
|---|---|---|---|---|---|---|
| Power | 172.8 kW | 172.8 kW | 220.7 kW | 220.7 kW | 246.4 kW | 279.5 kW |
| Rated speed | 2,200 rpm | 2,200 rpm | 2,100 rpm | 2,100 rpm | 2,100 rpm | 2,100 rpm |
| Linkage category | Cat III | Cat III | Cat III | Cat III | Cat III | – |
| Cylinders | 6 | 6 | 6 | 6 | 6 | 6 |
| Displacement | 8,268 cm³ | 8,268 cm³ | 10,014 cm³ | 10,014 cm³ | 10,016 cm³ | 10,016 cm³ |
| Torque | 852 Nm | 818 Nm | 1,324 Nm | 1,334 Nm | 1,512 Nm | 1,715 Nm |
| Fuel tank capacity | 435 l | 757 l | 757 l | 757 l | 948 l | 948 l |
| Forward gears | 12 | 12 | 12 | 12 | 12 | 12 |
| Reverse gears | 3 | 3 | 3 | 3 | 3 | 3 |
| Top speed | 30 km/h | 30 km/h | 30 km/h | 30 km/h | 30 km/h | 30 km/h |
| Wheelbase | 3,058 mm | 3,150 mm | 3,302 mm | 3,150 mm | 3,678 mm | 1,943 mm |
| Length | 6,410 mm | 6,517 mm | 6,706 mm | 6,580 mm | 7,544 mm | 7,610 mm |
| Width | 3,035 mm | 2,661 mm | 3,035 mm | 2,661 mm | 4,005 mm | 3,890 mm |
| Height | 3,279 mm | 3,198 mm | 3,532 mm | 3,532 mm | 3,632 mm | 3,870 mm |
| Unladen weight | 10,935 kg | 12,798 kg | 13,635 kg | 13,669 kg | 15,441 kg | 15,728 kg |
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
9230
The 9200er series from Case IH includes the 9230. Production: 1990–1995. The engine delivers 235 hp (172.8 kW), has...
9240
The Case IH 9240 belongs to the 9200er series. Production: 1990–1994. The engine delivers 235 hp (172.8 kW), has 6...
9250
The Case IH 9250 is a model in the 9200er series. Production: 1990–1995. The engine delivers 300 hp (220.7 kW), has...
9260
With the 9260, Case IH offers a model from the 9200er series. Production: 1990–1994. The engine delivers 300 hp...
9280
The 9200er series from Case IH includes the 9280. Production: 1990–1995. The engine delivers 380 hp (279.5 kW), has...
Case IH9270no photo9270
The 9270 from Case IH is part of the 9200er series. Production: 1990–1995. The engine delivers 335 hp (246.4 kW),...