Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Briab Interconsult › Other models

Briab Interconsult Other models

2 models in this series

Briab Interconsult STF1 30 CATE – EU class O4 trailer: 38,500 kg gross vehicle weight, 5,030 kg unladen weight, 8.10 m long, 2,500 mm wide, built 2006

With a gross vehicle weight of 38,500 kg, the Briab Interconsult STF1 30 CATE falls into EU trailer class O4, the heavy trailers and semi-trailers above 10 tonnes hauled in long-distance haulage with their own air brake system, whether behind a tractor unit or as a drawbar trailer. Vehicles of this size spread their weight across several axles and need a load-bearing chassis.

Read on 3 more paragraphs

The Briab Interconsult STF1 30 CATE was built in 2006 and has an unladen weight of 5,030 kg; against a gross vehicle weight of 38,500 kg, that leaves a payload of 33,470 kg. Overall length is 8,100 mm, width 2,500 mm. The wheelbase is 895 mm. The permitted top speed is 100 km/h.

Trailers and semi-trailers in this weight class carry the actual load volume in road haulage, while the towing vehicle supplies only drive and steering. For the air brake to work at full effect, lines, brake cylinders and linings all have to work together without fault; without an intact brake coupling between towing vehicle and trailer, the combination may not be driven. The unladen weight, low relative to the payload, points to a build optimised for payload rather than tare weight.

When buying used, an air-braked trailer of this size lives or dies on the brake system: check lines, brake cylinders and linings for corrosion, leaks and wear. Inspect the chassis and frame for rust and cracks, along with axle bearings, suspension, tyres and tread depth, lighting, and the coupling to the towing vehicle. That also means checking the spare-parts supply for brakes and axles.

Sources: SpecCodex-Register: Kennwerte des Modells Briab Interconsult STF1 30 CATE

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare