Briab Interconsult STF1 30 CATE
Built: 2006 · Series: Other models
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Briab Interconsult STF1 30 CATE – EU class O4 trailer: 38,500 kg gross vehicle weight, 5,030 kg unladen weight, 8.10 m long, 2,500 mm wide, built 2006
With a gross vehicle weight of 38,500 kg, the Briab Interconsult STF1 30 CATE falls into EU trailer class O4, the heavy trailers and semi-trailers above 10 tonnes hauled in long-distance haulage with their own air brake system, whether behind a tractor unit or as a drawbar trailer. Vehicles of this size spread their weight across several axles and need a load-bearing chassis.
Read on 3 more paragraphs
The Briab Interconsult STF1 30 CATE was built in 2006 and has an unladen weight of 5,030 kg; against a gross vehicle weight of 38,500 kg, that leaves a payload of 33,470 kg. Overall length is 8,100 mm, width 2,500 mm. The wheelbase is 895 mm. The permitted top speed is 100 km/h.
Trailers and semi-trailers in this weight class carry the actual load volume in road haulage, while the towing vehicle supplies only drive and steering. For the air brake to work at full effect, lines, brake cylinders and linings all have to work together without fault; without an intact brake coupling between towing vehicle and trailer, the combination may not be driven. The unladen weight, low relative to the payload, points to a build optimised for payload rather than tare weight.
When buying used, an air-braked trailer of this size lives or dies on the brake system: check lines, brake cylinders and linings for corrosion, leaks and wear. Inspect the chassis and frame for rust and cracks, along with axle bearings, suspension, tyres and tread depth, lighting, and the coupling to the towing vehicle. That also means checking the spare-parts supply for brakes and axles.
Sources: SpecCodex-Register: Kennwerte des Modells Briab Interconsult STF1 30 CATE
Technical data
Dimensions and weights
| Length | 8,100 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 895 mmcorrect |
| Unladen weight | 5,030 kgcorrect |
| Gross vehicle weight | 38,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Briab Interconsult STF1 30 CATE weigh?
The unladen weight is 5,030 kg.
What is the gross vehicle weight of the Briab Interconsult STF1 30 CATE?
38,500 kg.
Up to what speed is the Briab Interconsult STF1 30 CATE approved?
Approved up to 100 km/h.
What are the dimensions of the Briab Interconsult STF1 30 CATE?
8,100 mm × 2,500 mm.
When was the Briab Interconsult STF1 30 CATE built?
Production years: 2006.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.