Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Zetor › Serie-2 (UR-1) › 7711/7745

Zetor 7711/7745

Built: 1985–1993 · Series: Serie-2 (UR-1)

More machines from model year 1985

Wikimedia Commons · CC BY-SA 3.0 · Jiří Erben · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 7711/7745, Zetor offers a model from the Serie-2 (UR-1) series. Production: 1985–1993. The engine delivers 73 hp (53.7 kW), has 4 cylinders, with a displacement of 3,922 cm³. Torque is 247 Nm. Rated speed is 2,200 rpm. The machine is 3,760 mm long, 1,840 mm wide and 2,610 mm high. The unladen weight is 3,103 kg. The wheelbase measures 2,257 mm. Ground clearance is 490 mm. Top speed is 25 km/h. Transmission: 10 V/2 R or 20 V/4 R. The engine is water-cooled. Tyres: front 7.50-16 ASF (A: 11.2-24 AS), rear 16.9-30 AS. The fuel is diesel. The bore measures 102 mm. The stroke is 120 mm. Maximum torque is reached at 1,600 rpm. Construction: unit construction (no separate frame). The Serie-2 (UR-1) series covers 7 models. Rated output within it ranges from 45 to 73 hp; the 7711/7745 sits at the top of that range with 73 hp. Its immediate neighbours are the 7211/7245 below it with 66 hp. Unladen weight within it ranges from 2,230 to 3,835 kg; here the 7711/7745 sits in the middle of that range with 3,103 kg. 371 Zetor models across 27 series are on record.

Zetor 5211-7745: the classic UR I series, from the 5211/5245 to the 7711/7745, 33.1 to 53.7 kW, three- and four-cylinder engines with water cooling

This series covers Zetor's first "Unified Row" (UR I), which from 1982 replaced the older Crystal tractors and carried type designations from 5211/5245 up to 7711/7745. Through the 1980s it was among the most widely built tractors of the Eastern Bloc.

Read on 4 more paragraphs

The register lists 7 live models built between 1984 and 2004, including the smaller 5211/5245 and 6211/6245 and the stronger 7211/7245 and 7711/7745. Output ranges from 33.1 to 53.7 kW, weight from 2,230 to 3,835 kg, displacement from 2,696 to 3,922 cm3 across three- and four-cylinder engines.

Conceptually, the UR I tractors were simple, easy-to-maintain all-rounders for arable work and transport, often with optional four-wheel drive, built for high volumes and long service life rather than comfort.

Since the series ran for over two decades with only minor updates, early and late examples differ little technically; when buying used, the condition of the hydraulics and gearbox matters most.

In this power class of 33.1 to 53.7 kW, the ISO 730 three-point linkage is mostly built to Category I, with the PTO running at the standard 540 rpm speed. Since the UR I series was built for over two decades around shared central components, many mechanical parts – clutch, rear axle, hydraulic pump – interchange between model years and even with other Zetor series from the same era.

Sources: SpecCodex register, model data: Zetor Serie 2 (UR I), Zetor

Technical data

Engine

EngineZetor 7701, 50 kW (68 KM)correct
Fueldieselcorrect
Power73 hp (53.7 kW)correct
Rated speed2,200 rpmcorrect
Torque247 Nmcorrect
Speed at max. torque1,600 rpmcorrect
Cylinders4correct
Displacement3,922 cm³correct
Bore102 mmcorrect
Stroke120 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,760 mmcorrect
Width1,840 mmcorrect
Height2,610 mmcorrect
Wheelbase2,257 mmcorrect
Ground clearance490 mmcorrect
Unladen weight3,103 kgcorrect

Drivetrain and chassis

Driverear- or four-wheel drivecorrect
Gearbox10 V/2 R or 20 V/4 Rcorrect
Front tyres7.50-16 ASF (A: 11.2-24 AS)correct
Rear tyres16.9-30 AScorrect
Top speed25 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct

Where this model stands

Power-to-weight ratio: 17.3 kW/t (54 kW / 3.1 t)

Power class: Universal (40–100 hp)

Stronger than 50% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Zetor 7711/7745 have?

The Zetor 7711/7745 delivers 73 hp.

How much does the Zetor 7711/7745 weigh?

The unladen weight is 3,103 kg.

What engine does the Zetor 7711/7745 have?

4 cylinders, 3,922 cm³ displacement, Diesel.

How fast does the Zetor 7711/7745 go?

Top speed is 25 km/h.

What are the dimensions of the Zetor 7711/7745?

3,760 mm × 1,840 mm × 2,610 mm.

When was the Zetor 7711/7745 built?

Production years: 1985–1993.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Wikipedia (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare