Technical register for agricultural, construction and commercial machinery · sourced data
StartExcavators & compactionVolvo › EC210LC

Volvo EC210LC

Series: Volvo Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Volvo Hydraulic Excavator series from Volvo includes the EC210LC. The engine delivers 162.2 hp (106.6 kW), has 6 cylinders, with a displacement of 5,901 cm³. Torque is 618.1 Nm. Rated speed is 1,900 rpm. The unladen weight is 20,500 kg. Ground clearance is 460.2 mm. The tank holds 350.2 litres. Maximum torque is reached at 1,500 rpm. The pump delivers 400.1 l/min. The hydraulic tank holds 285 litres. Working pressure is 343 bar. The cooling system holds 26.9 litres. The oil fill is 24.2 litres. The electrical system runs on 24 V. The engine fitted is the B5,9-C. The Volvo Hydraulic Excavator series covers 53 models. Rated output within it ranges from 99.4 to 534.3 hp; the EC210LC sits at the bottom of that range with 162.2 hp. Its immediate neighbours are the EC210BNLC below it with 161.2 hp and the EC210C above it with 167.3 hp. 5366 Volvo models across 29 series are on record. The model is listed under Excavators & compaction. 19 verified figures from 1 source are on file.

Volvo EC Excavators: What the Letters C, D and E Actually Mean

At Volvo, EC denotes a crawler excavator ("Excavator, Crawler"). The "Volvo Hydraulic Excavator" bucket holds 53 models from the EC140E to the EC340, spanning 68 to 392 kW — the number after EC marks the size class, with lower numbers for lighter machines and higher ones for heavier machines.

Read on 4 more paragraphs

The trailing letter marks the generation: the C-Series (including EC160C, EC210C, EC240C) was built into the early 2010s, the D-Series (including EC220D) followed as an efficiency-focused generation, and the current E-Series (including EC160E, EC220E) builds on the D-Series technology with further gains in fuel consumption and operator comfort.

The range's spread shows in displacement (3,900 to 16,100 cm³, 4 to 6 cylinders) and torque (390 to 2,570 Nm) — from compact to heavy crawler excavators.

When buying used, generation matters as much as hours on the clock: parts, software and emissions stage differ between the C-, D- and E-Series even when the base designation (e.g. EC220) stays the same.

In short: number = size, trailing letter = generation — together they form the complete model designation.

Sources: Kennwerte der Modelle Volvo Hydraulic Excavator, – Volvo D-Series middleweight excavators are 'D'esigned for efficiency, – EC27C, Volvo C series, – EC220E | Excavators | Volvo Construction Equipment

Technical data

Engine

Engine modelB5.9-Ccorrect
Power162.2 hp (106.6 kW)correct
Rated speed1,900 rpmcorrect
Torque618.1correct
Speed at max. torque1,500 rpmcorrect
Cylinders6correct
Displacement5,901 cm³correct
Aspirationturbochargedcorrect
Coolant capacity26.9 lcorrect
Engine oil capacity24.2 lcorrect

Dimensions and weights

Ground clearance460.2correct
Unladen weight20,500 kgcorrect

Working data

Pump flow400.1 l/mincorrect
Hydraulic oil capacity285 lcorrect
Hydraulic pressure343 barcorrect
Fuel tank capacity350.2 lcorrect

Other data

Cab height2,901.7correct
System voltage24 Vcorrect

More machines with this engine (B5.9-C, 20)

Where this model stands

Power-to-weight ratio: 5.2 kW/t (107 kW / 20.5 t)

Stronger than 45% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Volvo EC210LC have?

The Volvo EC210LC delivers 162 hp.

How much does the Volvo EC210LC weigh?

The unladen weight is 20,500 kg.

What engine does the Volvo EC210LC have?

6 cylinders, 5,901 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare