Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Ursus › Other models › C-385 Power

Ursus C-385 Power

Built: 2015–2018 · Series: Other models

More machines from model year 2015

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The C-385 Power comes from Ursus. Production: 2015–2018. The engine delivers 82 hp (60 kW), has 4 cylinders, with a displacement of 4,400 cm³. Rated speed is 2,200 rpm. The machine is 4,240 mm long, 2,020 mm wide and 2,750 mm high. The unladen weight is 3,690 kg. The wheelbase measures 2,280 mm. Ground clearance is 375 mm. Top speed is 40 km/h. Lifting capacity is 3,600 kg. The engine is water-cooled. The fuel is diesel. Rated output across the Ursus range ranges from 8 to 192.6 hp; the C-385 Power sits in the middle of that range with 82 hp. Its immediate neighbours are the 6024 below it with 81.6 hp and the C-385 above it with 85 hp. Rated output across the Ursus range ranges from 5.9 to 141.7 kW; here the C-385 Power sits in the lower part of that range with 60 kW. 221 Ursus models across 12 series are on record.

Ursus — one brand, two licences, many relatives

Anyone looking at an Ursus rarely sees a purely in-house design. The brand's history is a history of licences — and that is precisely why parts are often easier to find than the production figures would suggest.

Read on 4 more paragraphs

In 1965 the Warsaw plant began building the C-4011 under a licence agreement with Zetor in Brno. At its heart sat the S-4001 engine, the Polish version of Zetor's Z-4001. That kinship runs through the ranges: the later C-360, built from 1976 and in the programme until the end of 1994, used the S-4003, the strongest engine of that family.

In 1974 a second licence followed — the British one from Massey Ferguson, together with the associated production plant. Models such as the MF 235, MF 255 and MF 265 were then built in Poland with Perkins engines and became a fixture on many farms. The higher Ursus ranges with four-digit numbers descend from this line.

One remarkable long-runner stands out: the C-325 and its revised versions C-328 and C-330 — popularly the "thirties" — plus the C-335 export version, ran without interruption for 34 years until 1993.

When buying used it is therefore worth establishing the range's ancestry first. An Ursus from the Zetor line shares engine parts with Czech machines, one from the Massey Ferguson line with British ones. That decides where to look for components.

Sources: warzywa.pl, Wiadomości Rolnicze Polska, ursus.info.pl

Technical data

Engine

Fueldieselcorrect
Power82 hp (60 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement4,400 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,240 mmcorrect
Width2,020 mmcorrect
Height2,750 mmcorrect
Wheelbase2,280 mmcorrect
Ground clearance375 mmcorrect
Unladen weight3,690 kgcorrect

Drivetrain and chassis

Top speed40 km/hcorrect

Working data

Lifting capacity3,600 kgcorrect

Where this model stands

Power-to-weight ratio: 16.3 kW/t (60 kW / 3.7 t)

Power class: Universal (40–100 hp)

Stronger than 56% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ursus C-385 Power have?

The Ursus C-385 Power delivers 82 hp.

How much does the Ursus C-385 Power weigh?

The unladen weight is 3,690 kg.

What engine does the Ursus C-385 Power have?

4 cylinders, 4,400 cm³ displacement, Diesel.

How fast does the Ursus C-385 Power go?

Top speed is 40 km/h.

How much does the rear linkage of the Ursus C-385 Power lift?

The rear linkage lifts 3,600 kg.

What are the dimensions of the Ursus C-385 Power?

4,240 mm × 2,020 mm × 2,750 mm.

When was the Ursus C-385 Power built?

Production years: 2015–2018.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare