Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Ursus › Other models › C-382

Ursus C-382

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ursus C-382 is a four-cylinder tractor from the modern generation of the Polish maker Ursus, built from 2015 to 2021. The line used Perkins engines and, with the letter C, picked up the long tradition of the brand, which has built its tractors in Warsaw for decades.

The engine displaces 4,400 cm³ and delivers 82 PS (60 kW) at a rated 2,200 rpm. That is the output of a mid-range tractor that can move a plough, a cultivator and a mower without pushing the purchase price beyond the reach of small farms. With a top speed of 40 km/h the machine is brisk on the road, which counts when moving between scattered fields. The dimensions of 4,240 mm length, 2,020 mm width, 2,750 mm height and 2,280 mm wheelbase keep the tractor handy, so it can work in older farm buildings and on small fields too.

In the Ursus range the C-382 is the predecessor of the higher-rated variants of the same line. It was built for Polish family farms that wanted an inexpensive tractor with a well-known Perkins engine for arable work, forage and haulage.

Ursus — one brand, two licences, many relatives

Anyone looking at an Ursus rarely sees a purely in-house design. The brand's history is a history of licences — and that is precisely why parts are often easier to find than the production figures would suggest.

Read on 4 more paragraphs

In 1965 the Warsaw plant began building the C-4011 under a licence agreement with Zetor in Brno. At its heart sat the S-4001 engine, the Polish version of Zetor's Z-4001. That kinship runs through the ranges: the later C-360, built from 1976 and in the programme until the end of 1994, used the S-4003, the strongest engine of that family.

In 1974 a second licence followed — the British one from Massey Ferguson, together with the associated production plant. Models such as the MF 235, MF 255 and MF 265 were then built in Poland with Perkins engines and became a fixture on many farms. The higher Ursus ranges with four-digit numbers descend from this line.

One remarkable long-runner stands out: the C-325 and its revised versions C-328 and C-330 — popularly the "thirties" — plus the C-335 export version, ran without interruption for 34 years until 1993.

When buying used it is therefore worth establishing the range's ancestry first. An Ursus from the Zetor line shares engine parts with Czech machines, one from the Massey Ferguson line with British ones. That decides where to look for components.

Sources: warzywa.pl, Wiadomości Rolnicze Polska, ursus.info.pl

Technical data

Engine

Power82 hp (60 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement4,400 cm³correct

Dimensions and weights

Length4,240 mmcorrect
Width2,020 mmcorrect
Height2,750 mmcorrect
Wheelbase2,280 mmcorrect

Drivetrain and chassis

Top speed40 km/hcorrect

Frequently asked questions

How much power does the Ursus C-382 have?

The Ursus C-382 delivers 82 hp.

What engine does the Ursus C-382 have?

4 cylinders, 4,400 cm³ displacement.

How fast does the Ursus C-382 go?

Top speed is 40 km/h.

What are the dimensions of the Ursus C-382?

4,240 mm × 2,020 mm × 2,750 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Latvian open data portal (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved October 2026) · koneviesti.fi (retrieved October 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare