Ursus 360 3P
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Ursus 360 3P belongs to the tractor group and is a model with three cylinders. It has a displacement of 2,502 cm³ and delivers 47.5 HP (34.9 kW) at a nominal speed of 2,250 rpm. The vehicle measures 3,610 mm in length, 1,800 mm in width, 2,050 mm in height and has a wheelbase of 2,172 mm. The curb weight is 2,056 kg and the fuel tank holds 68 L. The transmission offers 10 forward and 2 reverse gears with a top speed of 25 km/h.
With a torque of 165 Nm the engine provides sufficient pulling power for field work, while the 10‑step forward gearing allows fine speed adjustment. The relatively compact width of 1,800 mm eases maneuvering between rows, and the weight of about 2,056 kg generates a moderate ground pressure suitable for most soils. The 68 L fuel capacity enables long work periods without frequent refuelling, and the Cat II lift class supports lifting light implements.
The Ursus 360 3P is designed for typical tasks on medium‑sized fields, such as pulling a plow, harrow or sprayer. The ten forward gears allow the working speed to be flexibly adapted to varying conditions. Its compact build and moderate weight make it especially suitable for small to medium farms where agility and adequate power for common implements are required.
Ursus — one brand, two licences, many relatives
Anyone looking at an Ursus rarely sees a purely in-house design. The brand's history is a history of licences — and that is precisely why parts are often easier to find than the production figures would suggest.
Read on 4 more paragraphs
In 1965 the Warsaw plant began building the C-4011 under a licence agreement with Zetor in Brno. At its heart sat the S-4001 engine, the Polish version of Zetor's Z-4001. That kinship runs through the ranges: the later C-360, built from 1976 and in the programme until the end of 1994, used the S-4003, the strongest engine of that family.
In 1974 a second licence followed — the British one from Massey Ferguson, together with the associated production plant. Models such as the MF 235, MF 255 and MF 265 were then built in Poland with Perkins engines and became a fixture on many farms. The higher Ursus ranges with four-digit numbers descend from this line.
One remarkable long-runner stands out: the C-325 and its revised versions C-328 and C-330 — popularly the "thirties" — plus the C-335 export version, ran without interruption for 34 years until 1993.
When buying used it is therefore worth establishing the range's ancestry first. An Ursus from the Zetor line shares engine parts with Czech machines, one from the Massey Ferguson line with British ones. That decides where to look for components.
Sources: warzywa.pl, Wiadomości Rolnicze Polska, ursus.info.pl
Technical data
Engine
| Power | 47.5 hp (34.9 kW)correct |
|---|---|
| Rated speed | 2,250 rpmcorrect |
| Torque | 165 Nmcorrect |
| Cylinders | 3correct |
| Displacement | 2,502 cm³correct |
Dimensions and weights
| Length | 3,610 mmcorrect |
|---|---|
| Width | 1,800 mmcorrect |
| Height | 2,050 mmcorrect |
| Wheelbase | 2,172 mmcorrect |
| Unladen weight | 2,056 kgcorrect |
Drivetrain and chassis
| Gearbox | 10 V/2 Rcorrect |
|---|---|
| Forward gears | 10correct |
| Reverse gears | 2correct |
| Top speed | 25 km/hcorrect |
Working data
| Fuel tank capacity | 68 lcorrect |
|---|
Other data
| Linkage category | Cat IIcorrect |
|---|
Where this model stands
Power-to-weight ratio: 17 kW/t (35 kW / 2.1 t)
Power class: Universal (40–100 hp)
Stronger than 31% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Ursus 360 3P have?
The Ursus 360 3P delivers 47.5 hp.
How much does the Ursus 360 3P weigh?
The unladen weight is 2,056 kg.
What engine does the Ursus 360 3P have?
3 cylinders, 2,502 cm³ displacement.
How fast does the Ursus 360 3P go?
Top speed is 25 km/h.
What are the dimensions of the Ursus 360 3P?
3,610 mm × 1,800 mm × 2,050 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
(FarmAll Technology) 2812
(FarmAll Technology) 3512
(FarmAll Technology) 4512
1.002 / 1.004
1.012 / 1.014
1.201 / 1.204
1.604
1012
1014 de luxe
1044
1122 / 1124
1201 Turbo
Sources: Latvian open data portal (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
